Sunlu PLA+ 3D printing filament has a diameter of 1.75 mm and is suitable for FDM 3D printers that support this diameter. It has an impact strength of up to 8 kJ/m², low shrinkage, and good layer adhesion. Its even winding on the spool reduces the risk of knots and tangles during printing.
Dimensional accuracy is ±0.02 mm. Recommended print settings are a speed of 50–100 mm/s at 195–205 °C, or a speed of 100–300 mm/s at 205–220 °C.
- Material: PLA+
- Color: Beige
- Diameter: 1.75 mm
- Weight: 1 kg
- Packaging: Spool
- Dimensional accuracy: ±0.02 mm
- Impact strength: Up to 8 kJ/m²
- Density: 1.23 g/cm³
- Vicat softening temperature: 54 °C
- Heat deflection temperature (HDT): 53 °C
- Melting temperature: 164 °C
- Melt flow rate: 6.3 g/10 min
- Tensile strength: 64 MPa
- Elongation at break: 17 %
- Flexural strength: 86 MPa
- Elastic modulus: 2907 MPa
- IZOD impact strength (X-Y): 3.5 kJ/m²
- Compatibility: FDM 3D printers that support 1.75 mm filament
- Recommended print speed: 50–100 mm/s or 100–300 mm/s
- Recommended print temperature: 195–205 °C or 205–220 °C
- Material
- PLA+
- Colour
- Beige
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.