Sunlu PLA+ filament in beige color, ideal for 3D printing with excellent results in strength and aesthetics.

• Diameter: 1.75 mm
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Tensile strength: 64 MPa
• Flexural strength: 86 MPa
• IZOD impact resistance (X-Y): 3.5 kJ/m²
• Elongation at break: 17 %
• Modulus of elasticity: 2907 MPa
• Melt flow rate: 6.3 g/10 min

The filament has low shrinkage and good interlayer adhesion, ensuring smooth and accurate printing. It is also compatible with almost all 3D FDM printers that support 1.75 mm filament. Recommended printing speeds are 50–100 mm/s at 195–205 °C or 100–300 mm/s at 205–220 °C.