The brown Sunlu PLA High-Speed Marble filament creates 3D prints with a stone-like appearance and texture, thanks to particles that mimic marble. It is suitable for architectural models, sculptures, and artistic creations, and supports print speeds from 50 to 600 mm/s. Infill speeds reach up to 450 mm/s, and speeds for thin walls reach up to 600 mm/s.

Dimensional accuracy of ±0.02 mm, low shrinkage, and a consistent diameter contribute to smooth feeding and repeatable results. It is compatible with most FDM printers, including models from Bambu Lab, Creality, Prusa, and Anycubic.

• Material: PLA
• Color: Brown
• Packaging: Spool
• Print speed: 50–600 mm/s
• Infill speed: Up to 450 mm/s
• Thin-wall print speed: Up to 600 mm/s
• Dimensional accuracy: ±0.02 mm
• Density: 1.25 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature: 54.8 °C
• Melting temperature: 164 °C
• Melt flow rate: 10.7 g/10 min
• Tensile strength: 41 MPa
• Elongation at break: 80%
• Flexural strength: 70 MPa
• Elastic modulus: 3400 MPa
• Impact strength (X-Y): 11 kJ/m²
• Compatibility: FDM printers, Bambu Lab, Creality, Prusa, and Anycubic