Anycubic PETG 3D printing filament combines ease of printing with an impact strength of 45 ± 2 kJ/m² on the X-Y axis. It is resistant to water, weather conditions, and many chemicals, including gasoline and detergents, and can be used for toys, enclosures, structural components, and mechanical prototypes.
The identification chip works with the Anycubic ACE Pro to automatically identify printing settings. The reusable spool has a threaded connection. Before printing, it is recommended to dry the material and store it in a humidity-controlled environment.
- Material: PETG
- Color: Gray
- Weight: 1 kg
- Packaging: Spool
- Compatibility: Anycubic ACE Pro
- Recommended nozzle diameter: 0.2 mm or larger
- Nozzle temperature: 230–250 °C
- Print bed temperature: 60–70 °C
- Recommended printing speed: 50–250 mm/s
- Maximum print volume: 12 mm³/s
- Drying conditions: 55–65 °C for 8–10 hours
- Density: 1.23 g/cm³
- Material flow rate: 25 ± 3 g/10 min
- Melting temperature: 130 °C
- Heat deflection temperature: 72 °C
- Deformation resistance: 69 °C
- Moisture absorption: 0.40%
- Material stiffness: 1850 ± 100 MPa
- Tensile strength: 52 ± 1 MPa
- Elongation at break: 13 ± 1%
- Flexural modulus: 2000 ± 50 MPa
- Flexural strength: 80 ± 2 MPa
- Tensile strength on the Z axis: 31 ± 3 MPa
- Material
- PETG
- Colour
- Grey
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.