Sunlu PLA+ 2.0 filament is designed for printing on FDM 3D printers and supports print speeds of up to 300 mm/s. Its flow rate is up to 1.5 times higher than that of standard PLA, while its diameter tolerance of ±0.02 mm helps ensure consistent feeding and extrusion accuracy. This material combines the ease of use of PLA with durability comparable to Easy ABS and is designed to resist cracking and the wear and tear of everyday use.

It is compatible with FDM 3D printers from SUNLU and other manufacturers, as well as SUNLU filament accessories and dryers. Its density is 1.21 g/cm³, while its Vicat softening temperature is 54 °C, heat deflection temperature is 53.8 °C, and melting temperature is 164 °C.

• Material: PLA+ 2.0
• Color: Red
• Diameter: 1.75 mm
• Diameter tolerance: ±0.02 mm
• Weight: 1 kg
• Packaging: Spool
• Maximum print speed: 300 mm/s
• Melt flow rate: 7.8 g/10 min
• Density: 1.21 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature: 53.8 °C
• Melting temperature: 164 °C
• Tensile strength: 53.4 MPa
• Elongation at break: 20.3 %
• Flexural strength: 81.8 MPa
• Flexural modulus: 2740 MPa
• IZOD notched impact strength: 19.8 kJ/m²