3D Printer Filament

Sunlu PLA+ 2.0 1.75mm Olive Green 1kg 1τμχ (Spool) 3D Printer Filament

Sunlu PLA+ 2.0 filament is designed for FDM 3D printing and supports print speeds of up to 300 mm/s. Its increased flow rate, up to 1.5 times higher than standard PLA, helps ensure smooth feeding,...

Sunlu PLA+ 2.0 filament is designed for FDM 3D printing and supports print speeds of up to 300 mm/s. Its increased flow rate, up to 1.5 times higher than standard PLA, helps ensure smooth feeding, while its diameter and tolerance support consistent extrusion. It combines ease of use with resistance to cracking and the wear of everyday use.

It is compatible...

See full description See full description

Top specs

  • Material PLA+ 2.0
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
13 39 €
Delivery Fri, 27 Nov - Thu, 03 Dec
14,00 €   shipping cost
Sent from Greece
From GrShop 4.6 (42)
Greece
20+ pieces
See Printer Supplies on the page of GrShop

Learn more about invoicing

Description

Description

Sunlu PLA+ 2.0 filament is designed for FDM 3D printing and supports print speeds of up to 300 mm/s. Its increased flow rate, up to 1.5 times higher than standard PLA, helps ensure smooth feeding, while its diameter and tolerance support consistent extrusion. It combines ease of use with resistance to cracking and the wear of everyday use.

It is compatible with SUNLU FDM 3D printers and almost all FDM 3D printers from other manufacturers. Supplied on a spool.

  • Color: Beige
  • Material: PLA+ 2.0
  • Packaging format: Spool
  • Filament diameter: 1.75 mm
  • Diameter tolerance: ±0.02 mm
  • Maximum print speed: 300 mm/s
  • Flow rate compared to standard PLA: Up to 1.5 times higher
  • Density: 1.21 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature (HDT): 53.8 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 7.8 g/10 min
  • Tensile strength: 53.4 MPa
  • Elongation at break: 20.3%
  • Flexural strength: 81.8 MPa
  • Young's modulus: 2740 MPa
  • IZOD notched impact strength: 19.8 kJ/m²

Manufacturer

See full description

Specifications

Specifications

Material
PLA+ 2.0
Colour
Beige
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Sunlu PLA+ 2.0 filament is designed for FDM 3D printing and supports print speeds of up to 300 mm/s. Its increased flow rate, up to 1.5 times higher than standard PLA, helps ensure smooth feeding, while its diameter and tolerance support consistent extrusion. It combines ease of use with resistance to cracking and the wear of everyday use.

It is compatible with SUNLU FDM 3D printers and almost all FDM 3D printers from other manufacturers. Supplied on a spool.

  • Color: Beige
  • Material: PLA+ 2.0
  • Packaging format: Spool
  • Filament diameter: 1.75 mm
  • Diameter tolerance: ±0.02 mm
  • Maximum print speed: 300 mm/s
  • Flow rate compared to standard PLA: Up to 1.5 times higher
  • Density: 1.21 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature (HDT): 53.8 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 7.8 g/10 min
  • Tensile strength: 53.4 MPa
  • Elongation at break: 20.3%
  • Flexural strength: 81.8 MPa
  • Young's modulus: 2740 MPa
  • IZOD notched impact strength: 19.8 kJ/m²

Manufacturer

Material
PLA+ 2.0
Colour
Beige
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

13,39 €
14,00 €   shipping cost