Sunlu PLA+ 2.0 filament is used in FDM 3D printers and has a diameter of 1.75 mm with a tolerance of ±0.02 mm. It offers up to 1.5 times better flow than standard PLA and supports print speeds of up to 300 mm/s. Its composition combines the ease of use of PLA with durability comparable to Easy ABS, making it suitable for prints intended for everyday use.
The filament is compatible with SUNLU FDM 3D printers and nearly all FDM 3D printers from other manufacturers. It is supplied on a spool.
- Material: PLA+ 2.0
- Color: Klein Blue
- Diameter: 1.75 mm
- Diameter tolerance: ±0.02 mm
- Weight: 1 kg
- Packaging: Spool
- Print speed: Up to 300 mm/s
- Density: 1.21 g/cm³
- Vicat softening temperature: 54 °C
- Heat deflection temperature (HDT): 53.8 °C
- Melting temperature: 164 °C
- Melt flow rate: 7.8 g/10 min
- Tensile strength: 53.4 MPa
- Elongation at break: 20.3%
- Flexural strength: 81.8 MPa
- Flexural modulus: 2740 MPa
- IZOD notched impact strength: 19.8 kJ/m²
- Material
- PLA+ 2.0
- Colour
- Blue
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.