3D Printer Filament

Anycubic PC 1.75mm Black 1kg 1pc (Spool) 3D Printer Filament

Anycubic PC filament is suitable for printing parts that require impact and heat resistance, such as robot components, drone spare parts, and outdoor equipment. Prints have a smooth surface with a...

Anycubic PC filament is suitable for printing parts that require impact and heat resistance, such as robot components, drone spare parts, and outdoor equipment. Prints have a smooth surface with a translucent finish and are resistant to UV radiation and weather conditions.

Use requires an enclosed chamber and drying. The built-in identification chip enables...

See full description See full description

Top specs

  • Material PC
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
32 30 €
Delivery Tue, 01 Dec - Mon, 07 Dec
14,00 €   shipping cost
Sent from Greece
From Techstores 4.8 (96)
Greece
2 pieces
See Printer Supplies on the page of Techstores

Learn more about invoicing

Description

Description

Anycubic PC filament is suitable for printing parts that require impact and heat resistance, such as robot components, drone spare parts, and outdoor equipment. Prints have a smooth surface with a translucent finish and are resistant to UV radiation and weather conditions.

Use requires an enclosed chamber and drying. The built-in identification chip enables automatic recognition of print parameters with the Anycubic ACE Pro, while the reusable spool with a threaded connection helps reduce the risk of filament tangling.

  • Material: PC
  • Color: Black
  • Weight: 1 kg
  • Packaging: Spool
  • Density: 1.2 g/cm³
  • Melt flow rate: 15–20 g/10 min (270°C/2.16 kg)
  • Melting point: 230°C
  • Material stability: up to 122°C
  • Heat deflection temperature (0.45 MPa): 110°C
  • Water absorption: 0.25%
  • Material stiffness: 2550±100 MPa
  • Tensile strength: 65±6 MPa
  • Tensile strength along the Z-axis: 25±7 MPa
  • Elongation at break: 9±4%
  • Young's modulus: 2900±150 MPa
  • Flexural strength: 105±10 MPa
  • Impact strength along the X-Y axis: 30±12 kJ/m²
  • Printing conditions: Enclosed chamber and drying
  • Drying temperature: 80°C for 6–8 hours
  • Nozzle temperature: 270–290°C
  • Build plate temperature: 100–120°C
  • Printing speed: 40–250 mm/s
  • Maximum volumetric flow rate: 12 mm³/s
  • Minimum nozzle diameter: 0.2 mm

Manufacturer

See full description

Specifications

Specifications

Material
PC
Colour
Black
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Anycubic PC filament is suitable for printing parts that require impact and heat resistance, such as robot components, drone spare parts, and outdoor equipment. Prints have a smooth surface with a translucent finish and are resistant to UV radiation and weather conditions.

Use requires an enclosed chamber and drying. The built-in identification chip enables automatic recognition of print parameters with the Anycubic ACE Pro, while the reusable spool with a threaded connection helps reduce the risk of filament tangling.

  • Material: PC
  • Color: Black
  • Weight: 1 kg
  • Packaging: Spool
  • Density: 1.2 g/cm³
  • Melt flow rate: 15–20 g/10 min (270°C/2.16 kg)
  • Melting point: 230°C
  • Material stability: up to 122°C
  • Heat deflection temperature (0.45 MPa): 110°C
  • Water absorption: 0.25%
  • Material stiffness: 2550±100 MPa
  • Tensile strength: 65±6 MPa
  • Tensile strength along the Z-axis: 25±7 MPa
  • Elongation at break: 9±4%
  • Young's modulus: 2900±150 MPa
  • Flexural strength: 105±10 MPa
  • Impact strength along the X-Y axis: 30±12 kJ/m²
  • Printing conditions: Enclosed chamber and drying
  • Drying temperature: 80°C for 6–8 hours
  • Nozzle temperature: 270–290°C
  • Build plate temperature: 100–120°C
  • Printing speed: 40–250 mm/s
  • Maximum volumetric flow rate: 12 mm³/s
  • Minimum nozzle diameter: 0.2 mm

Manufacturer

Material
PC
Colour
Black
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

32,30 €
14,00 €   shipping cost