3D Printer Filament

Anycubic TPU Red 1kg (Spool) 3D Printer Filament

The red Anycubic TPU filament is flexible and has a rubber-like texture. Its elongation at break reaches 697%, and the material is resistant to wear, abrasion, oils, and tearing. It can be used to...

The red Anycubic TPU filament is flexible and has a rubber-like texture. Its elongation at break reaches 697%, and the material is resistant to wear, abrasion, oils, and tearing. It can be used to print items such as vibration dampers, wristbands, phone cases, and toy wheels.

Ready-made TPU profiles in the software help reduce stringing. Pre-drying at 70–80...

See full description See full description

Top specs

  • Weight 1 kg
  • See all
21 94 €
Delivery by Tue, 24 Nov
14,00 €   shipping cost
Sent from Greece
From PerfectGadget
Greece
2 pieces
See Printer Supplies on the page of PerfectGadget

Learn more about invoicing

Description

Description

The red Anycubic TPU filament is flexible and has a rubber-like texture. Its elongation at break reaches 697%, and the material is resistant to wear, abrasion, oils, and tearing. It can be used to print items such as vibration dampers, wristbands, phone cases, and toy wheels.

Ready-made TPU profiles in the software help reduce stringing. Pre-drying at 70–80 °C for 8 hours is recommended to reduce the risk of air bubbles during printing.

  • Material: TPU
  • Color: Red
  • Weight: 1 kg
  • Packaging: Spool
  • Printing temperature: 195–230 °C
  • Build plate temperature: 50–60 °C
  • Printing speed: 50–150 mm/s
  • Pre-drying: Recommended
  • Pre-drying conditions: 70–80 °C for 8 hours
  • Density: 1.23 g/cm³
  • Material flow rate: 25 g/10 min
  • Heat deflection temperature: 52 °C
  • Moisture absorption: 1.08%
  • Hardness: 95A
  • Material stiffness: 50.2 MPa
  • Tensile strength: 34.4 MPa
  • Elongation at break: 697%
  • Flexural modulus: 87.6 MPa
  • Flexural strength: 4.26 MPa
  • ACE Pro compatibility: No

Manufacturer

See full description

Specifications

Specifications

Material
TPU
Colour
Red
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The red Anycubic TPU filament is flexible and has a rubber-like texture. Its elongation at break reaches 697%, and the material is resistant to wear, abrasion, oils, and tearing. It can be used to print items such as vibration dampers, wristbands, phone cases, and toy wheels.

Ready-made TPU profiles in the software help reduce stringing. Pre-drying at 70–80 °C for 8 hours is recommended to reduce the risk of air bubbles during printing.

  • Material: TPU
  • Color: Red
  • Weight: 1 kg
  • Packaging: Spool
  • Printing temperature: 195–230 °C
  • Build plate temperature: 50–60 °C
  • Printing speed: 50–150 mm/s
  • Pre-drying: Recommended
  • Pre-drying conditions: 70–80 °C for 8 hours
  • Density: 1.23 g/cm³
  • Material flow rate: 25 g/10 min
  • Heat deflection temperature: 52 °C
  • Moisture absorption: 1.08%
  • Hardness: 95A
  • Material stiffness: 50.2 MPa
  • Tensile strength: 34.4 MPa
  • Elongation at break: 697%
  • Flexural modulus: 87.6 MPa
  • Flexural strength: 4.26 MPa
  • ACE Pro compatibility: No

Manufacturer

Material
TPU
Colour
Red
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

21,94 €
14,00 €   shipping cost