Sunlu PLA+ 2.0 filament in beige is designed for 3D printing with FDM printers. It has a diameter of 1.75 mm and a tolerance of ±0.02 mm, and supports print speeds of up to 300 mm/s. Its flow rate is up to 1.5 times higher than that of standard PLA.

It combines the ease of use of PLA with durability comparable to Easy ABS. It is crack-resistant and designed for creating functional parts and models for everyday use. It is compatible with SUNLU FDM printers and almost all FDM printers from other manufacturers.

• Material: PLA+ 2.0
• Color: Beige
• Weight: 1 kg
• Diameter: 1.75 mm
• Diameter tolerance: ±0.02 mm
• Packaging: Spool
• Maximum print speed: 300 mm/s
• Flow rate compared with standard PLA: Up to 1.5 times higher
• Density: 1.21 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53.8 °C
• Melting temperature: 164 °C
• Melt flow rate: 7.8 g/10 min
• Tensile strength: 53.4 MPa
• Elongation at break: 20.3%
• Flexural strength: 81.8 MPa
• Flexural modulus: 2740 MPa
• IZOD notched impact strength: 19.8 kJ/m²
• Compatibility: SUNLU FDM printers and almost all FDM printers from other manufacturers