Acrylic varnish for stamped floors of one component, suitable for decoration and protection of interior and exterior surfaces. It has strong adhesion, elasticity, and resistance to weather conditions.

• Dries in: 30 minutes
• Recoatable in: 2-3 hours
• Fully cured in: 24 hours

Surface preparation:

• The surface must be cleaned of dust, fats, oils, rust, mold residues, or moisture.
• Stir well and apply the product.
• The product reaches all its mechanical strengths after 20 - 30 days.

Application conditions: Avoid application at temperatures below 6°C and above 40°C and when relative humidity is greater than 80%. Adverse conditions during application can deteriorate the final properties of the product.

Application tools:

• Brush
• Roller

During work, keep the tools “wet” inside the container with the product. After use, clean the tools immediately with White spirit. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids into the groundwater.

Coverage: 10m2 / Lt per coat

Thinning: Ready to use

Drying: Dries in 30 minutes, recoatable in 2-3 hours. Fully cured in 24 hours.

Warning: Wear protective gloves, protective clothing, and personal protective equipment for eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present and easy to remove, remove them. Continue rinsing.

Call Poison Control Center immediately at 210 7793777.