3D Printer Filament

Sunlu Silk PLA+ 1.75mm Red 1kg (Spool) 3D Printer Filament

Sunlu PLA+ Silk filament has a glossy, silky finish that gives prints a decorative appearance without requiring additional polishing. It feeds smoothly and has low warping and shrinkage for...

Sunlu PLA+ Silk filament has a glossy, silky finish that gives prints a decorative appearance without requiring additional polishing. It feeds smoothly and has low warping and shrinkage for consistent, repeatable results.

It has a dimensional accuracy of 0.02 mm and does not require a heated bed. It is compatible with most FDM 3D printers, including those...

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
11 74 €
Delivery Fri, 27 Nov - Thu, 03 Dec
14,00 €   shipping cost
Sent from Greece
From GrShop 4.6 (42)
Greece
20+ pieces
See Printer Supplies on the page of GrShop

Learn more about invoicing

Description

Description

Sunlu PLA+ Silk filament has a glossy, silky finish that gives prints a decorative appearance without requiring additional polishing. It feeds smoothly and has low warping and shrinkage for consistent, repeatable results.

It has a dimensional accuracy of ±0.02 mm and does not require a heated bed. It is compatible with most FDM 3D printers, including those from Bambu Lab, Creality, Prusa and Anycubic.

  • Material: PLA+
  • Color: Red
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging format: Spool
  • Finish: Glossy, silky
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.25 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 53 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 9 g/10 min
  • Tensile strength: 60.6 MPa
  • Elongation at break: 6.3%
  • Flexural strength: 65 MPa
  • Young's modulus: 2760 MPa
  • Impact strength: 4.2 kJ/m²
  • Compatibility: Most FDM 3D printers, including those from Bambu Lab, Creality, Prusa and Anycubic

Manufacturer

See full description

Specifications

Specifications

Material
PLA+
Colour
Red
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Sunlu PLA+ Silk filament has a glossy, silky finish that gives prints a decorative appearance without requiring additional polishing. It feeds smoothly and has low warping and shrinkage for consistent, repeatable results.

It has a dimensional accuracy of ±0.02 mm and does not require a heated bed. It is compatible with most FDM 3D printers, including those from Bambu Lab, Creality, Prusa and Anycubic.

  • Material: PLA+
  • Color: Red
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging format: Spool
  • Finish: Glossy, silky
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.25 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 53 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 9 g/10 min
  • Tensile strength: 60.6 MPa
  • Elongation at break: 6.3%
  • Flexural strength: 65 MPa
  • Young's modulus: 2760 MPa
  • Impact strength: 4.2 kJ/m²
  • Compatibility: Most FDM 3D printers, including those from Bambu Lab, Creality, Prusa and Anycubic

Manufacturer

Material
PLA+
Colour
Red
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

11,74 €
14,00 €   shipping cost