Sunlu PLA+ Silk filament has a glossy, silky finish that gives prints a decorative appearance without requiring additional polishing. It feeds smoothly and has low warping and shrinkage for consistent, repeatable results.

It has a dimensional accuracy of ±0.02 mm and does not require a heated bed. It is compatible with most FDM 3D printers, including those from Bambu Lab, Creality, Prusa and Anycubic.

• Material: PLA+
• Color: Red
• Diameter: 1.75 mm
• Weight: 1 kg
• Packaging format: Spool
• Finish: Glossy, silky
• Dimensional accuracy: ±0.02 mm
• Density: 1.25 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature: 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 9 g/10 min
• Tensile strength: 60.6 MPa
• Elongation at break: 6.3%
• Flexural strength: 65 MPa
• Young's modulus: 2760 MPa
• Impact strength: 4.2 kJ/m²
• Compatibility: Most FDM 3D printers, including those from Bambu Lab, Creality, Prusa and Anycubic