3D Printer Filament

Sunlu PLA+ Blue Purple Red Gold (Spool) 3D Printer Filament

Sunlu PLA+ Silk Forth-Color filament creates multicolored prints in blue, purple, red, and gold, with its appearance changing depending on the viewing angle and light. Multi Color technology combines...

Sunlu PLA+ Silk Forth-Color filament creates multicolored prints in blue, purple, red, and gold, with its appearance changing depending on the viewing angle and light. Multi Color technology combines with a silky sheen and a smooth, glossy finish, with no additional polishing required.

The material is up to 50 times stronger than standard PLA, flexible, and...

See full description See full description

Top specs

  • See all
24 00 €
Delivery by Tue, 24 Nov
14,00 €   shipping cost
Sent from Greece
From Grobotronics 4.9 (47)

Learn more about invoicing

Description

Description

Sunlu PLA+ Silk Forth-Color filament creates multicolored prints in blue, purple, red, and gold, with its appearance changing depending on the viewing angle and light. Multi Color technology combines with a silky sheen and a smooth, glossy finish, with no additional polishing required.

The material is up to 50 times stronger than standard PLA, flexible, and resistant to impact and compression. Low shrinkage, a consistent diameter, and dimensional accuracy make feeding easier and contribute to stable prints on FDM 3D printers. The filament can be used for decorative projects, figurines, gadgets, prototypes, and display models.

  • Material: PLA+
  • Colors: Blue, purple, red, and gold
  • Technology: Multi Color
  • Finish: Silky and glossy
  • Packaging: Spool
  • Compatibility: FDM 3D printers
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.23 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 57 ± 3 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 7 ± 2.5 g/10 min
  • Tensile strength: 50 ± 4 MPa
  • Elongation at break: 11 ± 3%
  • Flexural strength: 78 ± 5 MPa
  • Elastic modulus: 2600 ± 300 MPa
  • Impact strength (X-Y): 78 ± 5 kJ/m²

Manufacturer

See full description

Specifications

Specifications

Material
PLA+
Colour
Blue
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Sunlu PLA+ Silk Forth-Color filament creates multicolored prints in blue, purple, red, and gold, with its appearance changing depending on the viewing angle and light. Multi Color technology combines with a silky sheen and a smooth, glossy finish, with no additional polishing required.

The material is up to 50 times stronger than standard PLA, flexible, and resistant to impact and compression. Low shrinkage, a consistent diameter, and dimensional accuracy make feeding easier and contribute to stable prints on FDM 3D printers. The filament can be used for decorative projects, figurines, gadgets, prototypes, and display models.

  • Material: PLA+
  • Colors: Blue, purple, red, and gold
  • Technology: Multi Color
  • Finish: Silky and glossy
  • Packaging: Spool
  • Compatibility: FDM 3D printers
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.23 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 57 ± 3 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 7 ± 2.5 g/10 min
  • Tensile strength: 50 ± 4 MPa
  • Elongation at break: 11 ± 3%
  • Flexural strength: 78 ± 5 MPa
  • Elastic modulus: 2600 ± 300 MPa
  • Impact strength (X-Y): 78 ± 5 kJ/m²

Manufacturer

Material
PLA+
Colour
Blue
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

24,00 €
14,00 €   shipping cost