3D Printer Filament

Sunlu Silk PLA+ 1.75mm Dual Color Pink Gold 1kg (Spool) 3D Printer Filament

The Sunlu PLA+ Silk dual-color filament combines pink and gold, with the appearance of prints changing depending on the viewing angle and lighting. Its silky texture and glossy finish enhance models...

The Sunlu PLA+ Silk dual-color filament combines pink and gold, with the appearance of prints changing depending on the viewing angle and lighting. Its silky texture and glossy finish enhance models without the need for additional polishing, while the material is intended for decorative projects, figurines, gadgets, and prototypes.

Low shrinkage and a...

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
19 90 €
Delivery by Tue, 24 Nov
14,00 €   shipping cost
Sent from Greece
From Grobotronics 4.9 (47)

Learn more about invoicing

Description

Description

The Sunlu PLA+ Silk dual-color filament combines pink and gold, with the appearance of prints changing depending on the viewing angle and lighting. Its silky texture and glossy finish enhance models without the need for additional polishing, while the material is intended for decorative projects, figurines, gadgets, and prototypes.

Low shrinkage and a consistent diameter contribute to smooth feeding and reliable printing. It is compatible with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, and Anycubic.

  • Material: PLA+
  • Color: Pink and gold
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.23 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 57 ± 3 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 7 ± 2.5 g/10 min
  • Tensile strength: 50 ± 4 MPa
  • Elongation at break: 11 ± 3%
  • Flexural strength: 78 ± 5 MPa
  • Modulus of elasticity: 2600 ± 300 MPa
  • Impact strength (X-Y): 78 ± 5 kJ/m²

Manufacturer

See full description

Specifications

Specifications

Material
PLA+
Colour
Pink
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Sunlu PLA+ Silk dual-color filament combines pink and gold, with the appearance of prints changing depending on the viewing angle and lighting. Its silky texture and glossy finish enhance models without the need for additional polishing, while the material is intended for decorative projects, figurines, gadgets, and prototypes.

Low shrinkage and a consistent diameter contribute to smooth feeding and reliable printing. It is compatible with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, and Anycubic.

  • Material: PLA+
  • Color: Pink and gold
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.23 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 57 ± 3 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 7 ± 2.5 g/10 min
  • Tensile strength: 50 ± 4 MPa
  • Elongation at break: 11 ± 3%
  • Flexural strength: 78 ± 5 MPa
  • Modulus of elasticity: 2600 ± 300 MPa
  • Impact strength (X-Y): 78 ± 5 kJ/m²

Manufacturer

Material
PLA+
Colour
Pink
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

19,90 €
14,00 €   shipping cost