Skroutz.mt

LED Strip 12V Warm White Light 2m SMD2835 Type with Motion Sensor & Power Supply
LED Strips

LED Strip 12V Warm White Light 2m SMD2835 Type with Motion Sensor & Power Supply

The SMD2835 LED strip turns on and off when you move your hand in front of the sensor, at a distance of 1–8 cm. Adjust the brightness by holding your hand over the sensor until the desired level is...

The SMD2835 LED strip turns on and off when you move your hand in front of the sensor, at a distance of 1–8 cm. Adjust the brightness by holding your hand over the sensor until the desired level is reached. The warm white light has a color temperature of 3000 K.

The strip can be cut at the points marked with the scissors symbol, every 3 LEDs, and attached...

See full description See full description

Top specs

See all

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    12V

    The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.

  • Light Shade

    Warm White

    The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
The product is not available for shipping to the selected country.
Review the product
Product report

Description & Specifications

The SMD2835 LED strip turns on and off when you move your hand in front of the sensor, at a distance of 1–8 cm. Adjust the brightness by holding your hand over the sensor until the desired level is reached. The warm white light has a color temperature of 3000 K.

The strip can be cut at the points marked with the scissors symbol, every 3 LEDs, and attached using the double-sided adhesive tape on its back. Connect the power adapter to the strip and sensor, then plug it into the mains.

  • Power supply: 12 V DC
  • LED type: SMD2835
  • Color temperature: 3000 K
  • Light color: Warm white
  • Length: 2 m
  • Power: 4 W
  • Number of LEDs: 30
  • Luminous flux: 80 lm
  • Current: Up to 0.5 A
  • Frequency: 50–60 Hz
  • Sensor: Motion sensor, operated by hand
  • Sensor range: 1–8 cm
  • Brightness adjustment: Hold your hand over the sensor
  • Power adapter: Input 100–240 V AC, 50–60 Hz; output 12 V DC, up to 1.5 A
  • Package contents: Power adapter, motion sensor

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Length
2 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Warm White

Light Colour

Warm White

The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
White Temperature
3000 K
Contents
Power Supply, Motion Sensor
USB
No

Additional Features

LED type
SMD2835

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD2835
It is a 2.8mm wide and 3.5mm long led type. They are suitable for indoor lighting. The 2835s are brighter than the 3528s and can provide much more light.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.