Skroutz.mt

LED Strip TV USB 5V RGB Light 1.524m SMD5050 Type with Power Supply & Remote Control
LED Strips

LED Strip TV USB 5V RGB Light 1.524m SMD5050 Type with Power Supply & Remote Control

The RGB LED strip provides appropriate backlighting, so that the eyes watching the television in a dark room get less tired. It offers a decorative feeling to the TV and fills the living room or...

The RGB LED strip provides appropriate backlighting, so that the eyes watching the television in a dark room get less tired. It offers a decorative feeling to the TV and fills the living room or bedroom with pleasant light. Depending on the program or mood, the color, intensity, and lighting mode can be easily changed using the included remote control. It...

See full description See full description

Top specs

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    5V

    The LED film is powered by electricity through a USB connected to a corresponding device, such as a computer screen or television.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.

  • Light Shade

    RGB

    The led film can take various shades by combining the colors, red, green and blue.
  • Connectivity IR

  • Television

    1

    Can be placed on the back of the television to enhance the viewing experience and provide ambient lighting.

  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The RGB LED strip provides appropriate backlighting, so that the eyes watching the television in a dark room get less tired. It offers a decorative feeling to the TV and fills the living room or bedroom with pleasant light. Depending on the program or mood, the color, intensity, and lighting mode can be easily changed using the included remote control. It can be powered by any USB port with a 5V DC output, such as a Power Bank, computer, laptop, phone charger, or adapter (5V). For better lighting effect, it is recommended to place the strips at least 5 cm from the edge of the television. It comes with adhesive tape. Suitable for TVs and monitors with a diagonal of 40 - 60". RGB with color change option.

  • Light source: 5050 SMD, 30 LEDs/m
  • Voltage: 5V DC
  • Power: 7.2 W/m
  • Protection: IP20
  • LED strip width: 1 cm
  • Cutting: The strip can be cut every 1 LED at the marked point, but after resizing, it can only be connected by soldering.

Set contents: 4 LED strips - 2 × 45 cm, 2 × 80 cm, 3 × 4-pin connection cables, 10 × 4-pin connectors, 1 × USB cable with DC plug (90 cm), 1 × IR RGB control unit, 1 × IR remote control with 24 buttons.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Length
1.524 m
Power Source
5V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

5V

The LED film is powered by electricity through a USB connected to a corresponding device, such as a computer screen or television.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Remote control, Power supply
USB
Yes

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
Power
7.2 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
Connectivity
IR
TV
Yes

TV


Can be placed on the back of the television to enhance the viewing experience and provide ambient lighting.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The RGB LED strip provides appropriate backlighting, so that the eyes watching the television in a dark room get less tired. It offers a decorative feeling to the TV and fills the living room or bedroom with pleasant light. Depending on the program or mood, the color, intensity, and lighting mode can be easily changed using the included remote control. It can be powered by any USB port with a 5V DC output, such as a Power Bank, computer, laptop, phone charger, or adapter (5V). For better lighting effect, it is recommended to place the strips at least 5 cm from the edge of the television. It comes with adhesive tape. Suitable for TVs and monitors with a diagonal of 40 - 60". RGB with color change option.

  • Light source: 5050 SMD, 30 LEDs/m
  • Voltage: 5V DC
  • Power: 7.2 W/m
  • Protection: IP20
  • LED strip width: 1 cm
  • Cutting: The strip can be cut every 1 LED at the marked point, but after resizing, it can only be connected by soldering.

Set contents: 4 LED strips - 2 × 45 cm, 2 × 80 cm, 3 × 4-pin connection cables, 10 × 4-pin connectors, 1 × USB cable with DC plug (90 cm), 1 × IR RGB control unit, 1 × IR remote control with 24 buttons.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Length
1.524 m
Power Source
5V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

5V

The LED film is powered by electricity through a USB connected to a corresponding device, such as a computer screen or television.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Remote control, Power supply
USB
Yes

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
Power
7.2 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
Connectivity
IR
TV
Yes

TV


Can be placed on the back of the television to enhance the viewing experience and provide ambient lighting.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.