Skroutz.mt

Notig N4240 Eccentric Sander 125mm Electric 350W
Sanders

Notig N4240 Eccentric Sander 125mm Electric 350W

The electric sander Notig N4240 features a disc diameter of 125mm and a power of 350W, ideal for one-handed operation. It is suitable for finishing, renovation, and maintenance. The compact design and...

The electric sander Notig N4240 features a disc diameter of 125mm and a power of 350W, ideal for one-handed operation. It is suitable for finishing, renovation, and maintenance. The compact design and balanced weight distribution reduce fatigue during extended use.

The 350W motor provides stable performance, while the variable speed from 6000 to 13000 RPM...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1300 gr
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The electric sander Notig N4240 features a disc diameter of 125mm and a power of 350W, ideal for one-handed operation. It is suitable for finishing, renovation, and maintenance. The compact design and balanced weight distribution reduce fatigue during extended use.

The 350W motor provides stable performance, while the variable speed from 6000 to 13000 RPM allows precise adjustment according to the materials and type of work. The dust collection system, along with the included dust bag, keeps the work area clean, improving visibility and finishing quality.

  • 350W power capacity for effective sanding
  • Variable speed for material adaptation
  • Compact design for easy one-handed use
  • Balanced weight distribution for comfort
  • 125mm disc diameter, common and easily available
  • Dust collection system with included bag
  • Suitable for prolonged use

Technical Specifications:

  • Model: Notig N4240
  • Product type: Electric sander
  • Power supply: 230V / 50Hz
  • Power: 350W
  • Speed: 6000 - 13000 RPM
  • Disc diameter: 125mm
  • Speed control: Yes
  • Dust collection system: Yes
  • Net weight: 1.7 kg

Package includes:

  • 1 x Notig N4240 electric sander
  • 1 x dust collection bag
  • Original Notig packaging
  • Receipt / Invoice

Frequently Asked Questions:

  • Is it suitable for sanding wood and metal? Yes, it can be used on wood, metal, and painted surfaces.
  • Is the speed adjustable? Yes, it features adjustable speed control.
  • Does it include a dust collection system? Yes, it comes with a dust bag and exhaust system.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Net Weight
1300 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The electric sander Notig N4240 features a disc diameter of 125mm and a power of 350W, ideal for one-handed operation. It is suitable for finishing, renovation, and maintenance. The compact design and balanced weight distribution reduce fatigue during extended use.

The 350W motor provides stable performance, while the variable speed from 6000 to 13000 RPM allows precise adjustment according to the materials and type of work. The dust collection system, along with the included dust bag, keeps the work area clean, improving visibility and finishing quality.

  • 350W power capacity for effective sanding
  • Variable speed for material adaptation
  • Compact design for easy one-handed use
  • Balanced weight distribution for comfort
  • 125mm disc diameter, common and easily available
  • Dust collection system with included bag
  • Suitable for prolonged use

Technical Specifications:

  • Model: Notig N4240
  • Product type: Electric sander
  • Power supply: 230V / 50Hz
  • Power: 350W
  • Speed: 6000 - 13000 RPM
  • Disc diameter: 125mm
  • Speed control: Yes
  • Dust collection system: Yes
  • Net weight: 1.7 kg

Package includes:

  • 1 x Notig N4240 electric sander
  • 1 x dust collection bag
  • Original Notig packaging
  • Receipt / Invoice

Frequently Asked Questions:

  • Is it suitable for sanding wood and metal? Yes, it can be used on wood, metal, and painted surfaces.
  • Is the speed adjustable? Yes, it features adjustable speed control.
  • Does it include a dust collection system? Yes, it comes with a dust bag and exhaust system.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Net Weight
1300 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.