Skroutz.mt

TeamGroup Mp33 SSD 512GB M.2 Type
SSD Hard Drives

TeamGroup Mp33 SSD 512GB M.2 Type

The TEAMGROUP MP33 is an internal M.2 2280 SSD with a PCIe Gen3 x4 interface and NVMe 1.3 support, designed for desktops and laptops with an M.2 NVMe slot. It uses 3D NAND TLC memory and SLC caching...

The TEAMGROUP MP33 is an internal M.2 2280 SSD with a PCIe Gen3 x4 interface and NVMe 1.3 support, designed for desktops and laptops with an M.2 NVMe slot. It uses 3D NAND TLC memory and SLC caching technology to improve performance in everyday computing tasks, gaming, and file transfers. The design is DRAM-less, focusing on a balance of speed and...

See full description See full description

  • Write Speed

    Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

    For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

  • Read Speed

    Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

    An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
  • See all
Review the product
Product report

Description

Description

The TEAMGROUP MP33 is an internal M.2 2280 SSD with a PCIe Gen3 x4 interface and NVMe 1.3 support, designed for desktops and laptops with an M.2 NVMe slot. It uses 3D NAND TLC memory and SLC caching technology to improve performance in everyday computing tasks, gaming, and file transfers. The design is DRAM-less, focusing on a balance of speed and reliability.

  • Capacity: 512GB
  • Sequential Performance: up to 1700 MB/s read and 1400 MB/s write, depending on system configuration and control conditions.
  • Physical size: 80 x 22 x 3.8 mm
  • Weight: approximately 6 g
  • Supported operating systems: Windows 11/10/8.1/8/7 and Linux 2.6.33 or newer.

Model information includes the number TM8FP6512G0C101, SKU NE-512T, and EAN 5706998614360.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
512 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
NVMe
Yes

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.

Dimensions

Form Factor
M.2 (Type 2280)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2280)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Performance

Read Speed
1700 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
1700 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The TEAMGROUP MP33 is an internal M.2 2280 SSD with a PCIe Gen3 x4 interface and NVMe 1.3 support, designed for desktops and laptops with an M.2 NVMe slot. It uses 3D NAND TLC memory and SLC caching technology to improve performance in everyday computing tasks, gaming, and file transfers. The design is DRAM-less, focusing on a balance of speed and reliability.

  • Capacity: 512GB
  • Sequential Performance: up to 1700 MB/s read and 1400 MB/s write, depending on system configuration and control conditions.
  • Physical size: 80 x 22 x 3.8 mm
  • Weight: approximately 6 g
  • Supported operating systems: Windows 11/10/8.1/8/7 and Linux 2.6.33 or newer.

Model information includes the number TM8FP6512G0C101, SKU NE-512T, and EAN 5706998614360.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
512 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
NVMe
Yes

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.

Dimensions

Form Factor
M.2 (Type 2280)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2280)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Performance

Read Speed
1700 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
1700 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

406,97 €
14,00 €   shipping cost