Skroutz.mt

Creality Cfs-c Multicolor Filament System 4 Colors K1c K1max K1 K1 Se Easy Upgrade 1002120010
Accessories for 3D Printers

Creality Cfs-c Multicolor Filament System 4 Colors K1c K1max K1 K1 Se Easy Upgrade 1002120010

The Creality CFS-C multicolor printing system manages up to four spools, enabling you to print with up to four colors or materials in the same job. During color changes, filament waste is routed...

The Creality CFS-C multicolor printing system manages up to four spools, enabling you to print with up to four colors or materials in the same job. During color changes, filament waste is routed outside instead of accumulating inside the printer. If a spool runs out, printing automatically continues with filament of the same material type and color.

RFID...

See full description See full description
279 90 €
Delivery by Thu, 12 Nov
14,00 €   shipping cost
Sent from Greece
From E-gate 4.8 (109)
4.8 (109 reviews)
Greece
1 piece
See 3D Printers & Accessories on the page of E-gate

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • xmdimitris
    5
    xmdimitris

    Verified purchase

    It works great and the installation is not difficult. The downside is the deactivation of the LIDAR and the loss of the open firmware. I consider the first to be a minor drawback since it offers little, mainly when using a smooth plate. The second, although I did not use it much even before when it was available, I believe it helps. Bed flatness check, wiping functions, and much greater control capability. In any case, regarding the various things I have read, I will say that I have not encountered any problems at all. For TPU use it is difficult for me in some cases, while the sensor (runout sensor) does not detect flexible filaments and I put in a cut straw so that the sensor does not miss it.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    neoklissp

    Verified purchase

  • xmdimitris
    5
    xmdimitris

    It works great and the installation is not difficult. The downside is the deactivation of the LIDAR and the loss of the open firmware. I consider the first to be a minor drawback since it offers little, mainly when using a smooth plate. The second, although I did not use it much even before when it was available, I believe it helps. Bed flatness check, wiping functions, and much greater control capability. In any case, regarding the various things I have read, I will say that I have not encountered any problems at all. For TPU use it is difficult for me in some cases, while the sensor (runout sensor) does not detect flexible filaments and I put in a cut straw so that the sensor does not miss it.

    Translated from Greek ·
    0
  • 5
    neoklissp

    0
  • See all
Product report

Description

The Creality CFS-C multicolor printing system manages up to four spools, enabling you to print with up to four colors or materials in the same job. During color changes, filament waste is routed outside instead of accumulating inside the printer. If a spool runs out, printing automatically continues with filament of the same material type and color.

RFID recognition with Creality RFID filament automatically loads the material type and printing parameters. Sensors detect when filament runs out or tangles and temporarily pause printing, while the system monitors cutter wear and alerts you when replacement is needed. The segment LCD displays the temperature and humidity in real time, while the desiccant helps maintain a dry environment for the filament.

  • Type: 3D multicolor printing system
  • Number of spool slots: 4
  • Compatibility: Creality K1C, K1, K1 Max, K1 SE
  • Supported filaments: Hyper PLA, CR-PLA, CR-Silk
  • Filament recognition: Automatic with Creality RFID filament
  • Automatic print continuation: With filament of the same material type and color
  • Sensors: Filament runout and tangle detection, cutter wear detection
  • Display: Segment LCD with real-time temperature and humidity readings
  • Drying method: Desiccant
  • Indicators: 4 white/red LED lights
  • Feed channels: 4 inputs and 1 output
  • Filament diameter: 1.75 ± 0.05 mm
  • Spools: 1 kg, diameter 197–202 mm and width 42–68 mm
  • Power supply: DC 24 V
  • Rated power: 30 W
  • Port: CAN
  • Multi-unit connection support: Not supported

Manufacturer

Manufacturer Details

Warnings & Safety Information

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • xmdimitris
    5
    xmdimitris

    Verified purchase

    It works great and the installation is not difficult. The downside is the deactivation of the LIDAR and the loss of the open firmware. I consider the first to be a minor drawback since it offers little, mainly when using a smooth plate. The second, although I did not use it much even before when it was available, I believe it helps. Bed flatness check, wiping functions, and much greater control capability. In any case, regarding the various things I have read, I will say that I have not encountered any problems at all. For TPU use it is difficult for me in some cases, while the sensor (runout sensor) does not detect flexible filaments and I put in a cut straw so that the sensor does not miss it.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    neoklissp

    Verified purchase

  • xmdimitris
    5
    xmdimitris

    It works great and the installation is not difficult. The downside is the deactivation of the LIDAR and the loss of the open firmware. I consider the first to be a minor drawback since it offers little, mainly when using a smooth plate. The second, although I did not use it much even before when it was available, I believe it helps. Bed flatness check, wiping functions, and much greater control capability. In any case, regarding the various things I have read, I will say that I have not encountered any problems at all. For TPU use it is difficult for me in some cases, while the sensor (runout sensor) does not detect flexible filaments and I put in a cut straw so that the sensor does not miss it.

    Translated from Greek ·
    0
  • 5
    neoklissp

    0
  • See all
279,90 €
14,00 €   shipping cost