Montage Fix assembly adhesive is used to secure decorative elements made of wood, metal, polystyrene, polyurethane and other synthetic materials to brick, concrete, plaster, plasterboard, wood and wood-based materials. It is acrylic dispersion-based, solvent-free and offers high initial adhesion of up to 125 kg/m². Once cured, it is waterproof, while its thixotropic consistency prevents it from running on vertical surfaces and allows it to fill minor substrate irregularities.
For application, surfaces must be degreased and completely dry, with at least one surface being porous. Apply the adhesive in beads or spots to one surface, along the edges and at the corners of panels, then press the elements together firmly. The open time is up to 15 minutes, while full curing and strength are achieved after 24 hours. Clean tools and fresh adhesive stains with water.
- Type: Assembly adhesive
- Volume: 250 ml
- Pieces: 1
- Composition: Acrylic dispersion, solvent-free
- Consistency: Thixotropic paste
- Initial adhesion: Up to 125 kg/m²
- Open time: Up to 15 minutes at 20 °C and 65% relative humidity
- Curing system: Physical drying and crystallisation
- Water resistance: Waterproof after curing
- Temperature resistance after drying: From -20 °C to +70 °C
- Application temperature: From +5 °C to +30 °C
- Specific gravity: 1.30 g/cm³
- Final curing time: 24 hours
- Cleaning: With water while the adhesive is still fresh
Dimensions
- Epoxy
- No
- 2-Component
- No
- High Temperature
- No
- Pieces
- 1 pcs
Capacity
- Quantity
- 250 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.