Description
Specifications
Soudal 62A wood glue is ready to use and based on a PVA dispersion. It is suitable for bonding softwood, plywood, chipboard and veneer. It can also be used on paper and cardboard and is intended for indoor use. Once dry, it becomes translucent and has a D2 water-resistance rating.
Stains may occur on hardwoods such as oak and tropical wood. For application, surfaces must be clean, dry and degreased. Apply the glue with a brush or fine-toothed spreader, then clamp the bonded parts for 2–4 hours.
- Type: Wood glue
- Base: PVA dispersion
- Use: Indoor
- Materials bonded: Softwood, plywood, chipboard, veneer, paper and cardboard
- Water resistance: Class D2
- Colour: White
- Appearance after drying: Translucent
- Open time: Approx. 15 min
- Application temperature: +5 °C to +30 °C
- Viscosity (Brookfield RVT 5/20): 10,000–18,000 mPa·s
- Density (DIN 53479): 1.1 g/cm³
- Solids content: 45–47%
- pH: 6–7
- Minimum film-forming temperature: 4 °C
- Pressing time for HPL/fibreboard at room temperature: Approx. 45–60 s
- Pressure: 1–2 kg/cm²
- Surface bonding consumption: Approx. 80–120 g/m²
- Assembly consumption: 150–180 g/m²
- Heat resistance after drying: −20 °C to +70 °C
- Quantity: 250 ml
- Pieces: 1
Dimensions
- Type
- Wood Glue
- Epoxy
- No
- 2-Component
- No
- High Temperature
- No
- Colour
- White
- Pieces
- 1 pcs
Capacity
- Quantity
- 250 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.