Skroutz.mt

Fnirsi Ds215h Std Oscilloscope Frequency Generator 2 in 1 50mhz 250ms/s
Oscilloscopes & Frequency Generators

Fnirsi Ds215h Std Oscilloscope Frequency Generator 2 in 1 50mhz 250ms/s

Fnirsi oscilloscope with a high-definition 3.5-inch IPS color display. The product features:

  • Backlight
  • Adjustable brightness
  • Type C power supply (5V/1A)
  • 1500mAh battery
  • Product size 66x110x19.5 mm
  • ...

Fnirsi oscilloscope with a high-definition 3.5-inch IPS color display. The product features:

  • Backlight
  • Adjustable brightness
  • Type C power supply (5V/1A)
  • 1500mAh battery
  • Product size 66x110x19.5 mm
  • Product weight 138 g

Oscilloscope parameters:

  • Channel: Dual
  • Bandwidth: 50MHz
  • Real-time sampling rate: 250MSa/s
  • Storage capacity: 14 million
  • Time base range:...
See full description See full description
Review the product
Product report

Description

Description

Fnirsi oscilloscope with a high-definition 3.5-inch IPS color display. The product features:

  • Backlight
  • Adjustable brightness
  • Type C power supply (5V/1A)
  • 1500mAh battery
  • Product size ≈ 66x110x19.5 mm
  • Product weight ≈ 138 g

Oscilloscope parameters:

  • Channel: Dual
  • Bandwidth: 50MHz
  • Real-time sampling rate: 250MSa/s
  • Storage capacity: 14 million
  • Time base range: 20ns/div - 20s/div
  • Vertical sensitivity: 10mV/div - 10V/div
  • Vertical resolution: 8 bits
  • Input resistance: 1MΩ
  • Waveform display mode: Scroll

Measurement data: Cycle, Frequency, Vpp, Maximum, Minimum, Average, RMS, Amp, Duty cycle D, Pulse width.

Probe attenuation factor: 1x/10x

Input coupling: AC/DC

Trigger type: Rising edge/Falling edge

Maximum voltage: ±400V

Trigger level range: 8 grids (positive and negative)

Trigger mode: Auto / Normal / Single

Signal generator parameters: Output waveform, supports multiple waveform outputs.

Waveform frequency: 0-50KHz

Square wave duty cycle: 0-100%

Waveform amplitude: 0.1V-3.0V

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Hand Tool
Monitor Size
3.5 "
Bandwidth
50 MHz
Channels
2
Weight
0.138 kg
Height
6.6 cm
Length
11 cm
Width
1.95 cm

Signal Modulation

AM
No

AM

Information is transmitted by varying the amplitude (intensity) of the carrier signal while the frequency remains constant. It is used in RF applications and communications testing.
FM
No

FM

The information is transmitted through changes in the frequency of the carrier signal. It offers greater noise resistance compared to AM.
PM
No

PM

The information is transmitted through changes in the phase of the carrier signal. It is used in telecommunications and digital transmission systems.
PWM
No

PWM

Information is encoded by changing the duration (duty cycle) of the pulses while the amplitude remains constant. Common in power electronics and motor control.
FSK
No

FSK

Digital modulation where different frequencies correspond to different digital values (e.g., 0 and 1). It is used in modems and wireless communications.
ASK
No

ASK

Digital modulation where the information is represented by changes in the signal amplitude. It is used in simple data transmission systems.
PSK
No

Waveform Types

Sin
No

Sin

(Sinusoidal) Produces a smooth periodic waveform with continuous amplitude variation. Used in tests of electronic circuits, audio, and telecommunications.
Square
Yes

Square

Generates a signal that alternates between two voltage levels with abrupt transitions. Suitable for digital circuits and timing tests.
Ramp
No

Ramp

Produces a signal with a linear increase or decrease in voltage over time before the cycle repeats. Used in scanning, timing, and control systems.
Pulse
No

Pulse

Generates short pulses with adjustable amplitude and duration. Useful for testing digital circuits and analyzing system response.
Arbitrary
No

Arbitrary

Allows the creation or loading of custom waveforms beyond the predefined signal shapes. Suitable for specialized measurements and simulations.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Fnirsi oscilloscope with a high-definition 3.5-inch IPS color display. The product features:

  • Backlight
  • Adjustable brightness
  • Type C power supply (5V/1A)
  • 1500mAh battery
  • Product size ≈ 66x110x19.5 mm
  • Product weight ≈ 138 g

Oscilloscope parameters:

  • Channel: Dual
  • Bandwidth: 50MHz
  • Real-time sampling rate: 250MSa/s
  • Storage capacity: 14 million
  • Time base range: 20ns/div - 20s/div
  • Vertical sensitivity: 10mV/div - 10V/div
  • Vertical resolution: 8 bits
  • Input resistance: 1MΩ
  • Waveform display mode: Scroll

Measurement data: Cycle, Frequency, Vpp, Maximum, Minimum, Average, RMS, Amp, Duty cycle D, Pulse width.

Probe attenuation factor: 1x/10x

Input coupling: AC/DC

Trigger type: Rising edge/Falling edge

Maximum voltage: ±400V

Trigger level range: 8 grids (positive and negative)

Trigger mode: Auto / Normal / Single

Signal generator parameters: Output waveform, supports multiple waveform outputs.

Waveform frequency: 0-50KHz

Square wave duty cycle: 0-100%

Waveform amplitude: 0.1V-3.0V

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Hand Tool
Monitor Size
3.5 "
Bandwidth
50 MHz
Channels
2
Weight
0.138 kg
Height
6.6 cm
Length
11 cm
Width
1.95 cm

Signal Modulation

AM
No

AM

Information is transmitted by varying the amplitude (intensity) of the carrier signal while the frequency remains constant. It is used in RF applications and communications testing.
FM
No

FM

The information is transmitted through changes in the frequency of the carrier signal. It offers greater noise resistance compared to AM.
PM
No

PM

The information is transmitted through changes in the phase of the carrier signal. It is used in telecommunications and digital transmission systems.
PWM
No

PWM

Information is encoded by changing the duration (duty cycle) of the pulses while the amplitude remains constant. Common in power electronics and motor control.
FSK
No

FSK

Digital modulation where different frequencies correspond to different digital values (e.g., 0 and 1). It is used in modems and wireless communications.
ASK
No

ASK

Digital modulation where the information is represented by changes in the signal amplitude. It is used in simple data transmission systems.
PSK
No

Waveform Types

Sin
No

Sin

(Sinusoidal) Produces a smooth periodic waveform with continuous amplitude variation. Used in tests of electronic circuits, audio, and telecommunications.
Square
Yes

Square

Generates a signal that alternates between two voltage levels with abrupt transitions. Suitable for digital circuits and timing tests.
Ramp
No

Ramp

Produces a signal with a linear increase or decrease in voltage over time before the cycle repeats. Used in scanning, timing, and control systems.
Pulse
No

Pulse

Generates short pulses with adjustable amplitude and duration. Useful for testing digital circuits and analyzing system response.
Arbitrary
No

Arbitrary

Allows the creation or loading of custom waveforms beyond the predefined signal shapes. Suitable for specialized measurements and simulations.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

105,00 €
14,00 €   shipping cost