Fillers - Drywall Hardening 5kg

CEKOL C-40 is an excellent material for processing drywall without the need for reinforcing tape. It is also used for filling cracks and scratches on wall and ceiling surfaces.

CEKOL C-40 is non-toxic during use and operation. It is an easy-to-use product with very good performance parameters. Thanks to a wide range of additives, CEKOL C-40 has increased strength and flexibility, allowing the avoidance of tape usage. CEKOL C-40 is intended for indoor use only. After sanding following complete drying, with properly selected sandpaper or polycarbonate mesh, it creates a perfectly smooth surface.

Advantages and product features:

• High durability and quality
• Precisely selected formula with high resistance to flow
• Crack resistant and sufficiently flexible
• Suitable for application on cracks and scratches
• Completely ecological and free from harmful ingredients

Substrate preparation:

Drywall must be installed in a stable and durable manner. Before gluing, carefully clean the grooves. For cut edges, widen the groove and remove all dust. Irregularly finished edges of the boards should be carefully primed with a deep penetrating primer.

Application:

After mixing, apply the product on the surface using stainless steel or plastic tools. Carefully fill the groove and allow to dry. If necessary, repeat the process after about 24 hours. After drying, the surface can be sanded using sanding mesh or sandpaper.

Storage:

Store in the original packaging, in a dry and dark place, away from sources of heat, and protect from overheating and frost.

Parameters:

• Brand: Cekol
• Capacity: 5 kg
• Maximum layer thickness: approximately 10 mm
• Coverage: 3-5 kg/m²
• Drying time: Depends on layer thickness and environmental conditions; calculates drying time of a 10 mm thickness per day
• Certification: Hygiene Certificate
• Application: Filler for drywall