Solar Charge Controllers

PWM Solar Charge Controller 12V 40A

The 13883-05000F-040M PWM charge controller is designed for 12 V photovoltaic systems. Its large LCD displays the charging current, discharge current, and battery voltage, refreshing every 5 seconds....

The 13883-05000F-040M PWM charge controller is designed for 12 V photovoltaic systems. Its large LCD displays the charging current, discharge current, and battery voltage, refreshing every 5 seconds. It automatically detects the system voltage and uses an electronically controlled circuit and PWM charging technology.

  • Type: PWM
  • Maximum voltage: 12 V
  • Maximum...
See full description See full description
119 90 €
Delivery by Mon, 23 Nov
14,00 €   shipping cost
Sent from Greece
From 787.gr Shop
Greece
20+ pieces
See Photovoltaics & Wind Turbines on the page of 787.gr Shop

Learn more about invoicing

Description

Description

The 13883-05000F-040M PWM charge controller is designed for 12 V photovoltaic systems. Its large LCD displays the charging current, discharge current, and battery voltage, refreshing every 5 seconds. It automatically detects the system voltage and uses an electronically controlled circuit and PWM charging technology.

  • Type: PWM
  • Maximum voltage: 12 V
  • Maximum current: 40 A
  • Photovoltaic panel voltage: < 50 V
  • Float charging voltage: 13.7 V / 27.4 V, adjustable
  • Low-voltage protection: 10.7 V / 21.4 V, adjustable
  • Low-voltage recovery: 12.6 V / 25.2 V, adjustable
  • No-load consumption: < 30 mA
  • Loop voltage drop: < 200 mA
  • Temperature compensation: -4 mV/Cell/℃
  • Maximum installation cable cross-section: 25 mm²
  • Operating temperature: -20 ℃ to 50 ℃
  • Storage temperature: -30 ℃ to 70 ℃
  • Operating relative humidity: ≤ 90%, non-condensing
  • Display: LCD
  • Display refresh interval: Every 5 seconds

Manufacturer

OEM
See full description

Specifications

Specifications

Type
PWM
Maximum Voltage
12 V
Maximum Short Circuit Current
40 A

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The 13883-05000F-040M PWM charge controller is designed for 12 V photovoltaic systems. Its large LCD displays the charging current, discharge current, and battery voltage, refreshing every 5 seconds. It automatically detects the system voltage and uses an electronically controlled circuit and PWM charging technology.

  • Type: PWM
  • Maximum voltage: 12 V
  • Maximum current: 40 A
  • Photovoltaic panel voltage: < 50 V
  • Float charging voltage: 13.7 V / 27.4 V, adjustable
  • Low-voltage protection: 10.7 V / 21.4 V, adjustable
  • Low-voltage recovery: 12.6 V / 25.2 V, adjustable
  • No-load consumption: < 30 mA
  • Loop voltage drop: < 200 mA
  • Temperature compensation: -4 mV/Cell/℃
  • Maximum installation cable cross-section: 25 mm²
  • Operating temperature: -20 ℃ to 50 ℃
  • Storage temperature: -30 ℃ to 70 ℃
  • Operating relative humidity: ≤ 90%, non-condensing
  • Display: LCD
  • Display refresh interval: Every 5 seconds

Manufacturer

OEM
Type
PWM
Maximum Voltage
12 V
Maximum Short Circuit Current
40 A

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

119,90 €
14,00 €   shipping cost