The MATRIX SYSTEM PRO - LUXORISE nail dust collector device in white is specially designed for the effective collection of dust particles produced during the filing process of gel, poly gel, or semi-permanent nail polish. Designed for immediate installation on the workbench, the MATRIX SYSTEM PRO - LUXORISE efficiently eliminates filing residues, ensuring a clean and professional workspace.

Specifications:

• Model: LUX-X360MS PRO
• Power: 48W
• Speed: 3500 RPM
• Power Supply: 220-240V 50Hz
• Dimensions: 260x260x80 mm
• Weight: 1500 g

Package includes:

• 1 x Nail dust collector device
• 1 x Power adapter
• 1 x Controller
• 1 x Jack-to-jack cable for connecting the controller
• 1 x User manual
• 1 x Protective mesh
• 1 x Filter
• Mounting screws
• 1 x Screwdriver

Instructions for Use:

• Install the device on the workbench and connect it to the power outlet using the adapter included in the package.
• Connect the controller using the cable and place the filter in its position.
• The speed regulator also acts as the ON/OFF switch. Turn it clockwise to start the device (a clicking sound will be heard). The device will turn on and the operation indicator will light up green.
• When starting, the device is set to level 0. Turn the setting to increase power. The number of active LEDs indicates the selected power level:
• Levels 1-2: 1 LED on
• Levels 3-5: 2 LEDs on
• Levels 6-8: 3 LEDs on
• Levels 9-10: 4 LEDs on
• Turn the setting counterclockwise to decrease the power. If turned fully back to the click, the device will turn off automatically.
• Press the control button to pause the device. The operation indicator will light red. Press again to restart; the indicator will return to green.

Cleaning Instructions:

• It is recommended to clean the filter after every 2-3 manicures.
• Use a soft brush to clean the surface of the filter or use a hairdryer (with cold air) to blow air from the back side of the filter. Cleaning with water is not recommended as it may damage the filter.
• Replace the filter with a new one when suction power decreases (approximately every 3 months, depending on frequency of use).