Nail Dust Collector Device MATRIX SYSTEM PRO - LUXORISE

The MATRIX SYSTEM PRO - LUXORISE device is specially designed for collecting dust particles produced during the process of polishing gel, polygel, or semi-permanent nail polish. It is placed directly on the work desk, ensuring a clean and professional working environment.

Technical Specifications:

• Model: LUX-X360MS PRO
• Power: 48W
• Speed: 3500 RPM
• Power supply: 220-240V 50Hz
• Dimensions: 260x260x80 mm
• Weight: 1500 g

Package Contents:

• 1 x Nail dust collector device
• 1 x Power adapter
• 1 x Controller
• 1 x Jack-to-jack cable for controller connection
• 1 x User manual
• 1 x Protective grille
• 1 x Filter
• Mounting screws
• 1 x Screwdriver

Instructions for Use:

1. Place the device on your work desk and connect it to the power supply using the included power adapter.
2. Connect the controller using the cable and place the filter in position.
3. The speed controller also serves as the ON/OFF button. Turn it clockwise to switch on the device (you will hear a click). The device will power on and the operation indicator will light up green.
4. Upon startup, the device is set to level 0. Turn the knob to increase the power level.
5. Turn the knob counterclockwise to decrease the power. If you turn it all the way back until the click, the device will automatically turn off.
6. Briefly press the control button to pause the device. The operation indicator will turn red. Press again to resume operation; the indicator will turn green.

Cleaning Instructions:

It is recommended to clean the filter after 2-3 manicures. Use a soft brush to clean the filter surface or use a hair dryer (with cold air) to blow from the back side of the filter. Cleaning with water is not recommended as it may damage the filter. Replace the filter with a new one when the suction power decreases (approximately every 3 months, depending on the frequency of use).