-
Full equipment - the set includes a drone, goggles, and transmitter, so you don't waste time matching compatible components.
-
1080p@60 fps - the smooth image makes flight control easier and helps you read the environment better.
-
Approximately 60 ms latency - the image response is faster, so control feels more natural.
-
Range up to 400 m - you get more freedom in open spaces and a calmer training flight.
-
Up to 10 minutes of flight - more time in the air means more practice with a single battery.
-
Functions for beginners and advanced users - you can start with stable hovering and then move on to full manual control.
The Aquila20 HD FPV Kit is a complete FPV flight kit that combines a drone, HD goggles, and a controller in one box. You get equipment ready to fly without needing to select separate components, which shortens the path from unboxing to your first flight. It is a solution for people who want to get into FPV with HD image quality and stable control.
Advantages
-
Full equipment - the set includes a drone, goggles, and transmitter, so you don't waste time matching compatible components.
-
1080p@60 fps - the smooth image makes flight control easier and helps you read the environment better.
-
Approximately 60 ms latency - the image response is faster, so control feels more natural.
-
Range up to 400 m - you get more freedom in open spaces and a calmer training flight.
-
Up to 10 minutes of flight - more time in the air means more practice with a single battery.
-
Functions for beginners and advanced users - you can start with stable hovering and then move on to full manual control.
HD image with low latency
The P1 HD VTX system provides 1080p@60 fps transmission, allowing you to see more details during maneuvers and when flying through obstacles. The approximately 60 ms latency reduces the gap between stick movement and what you see in the goggles. This image quality increases control over the drone and makes it easier to learn smooth responses.
Wide frame and better orientation
The camera with a 1/2.9" CMOS sensor and a 170° field of view covers a large part of the environment, making it easier to estimate the drone's height, distance, and position. This helps you detect obstacles faster and fly with greater confidence during narrow passages. A wider frame also results in more attractive flight shots.
Stable Flight
The 2S power system provides a clear power reserve while maintaining predictable handling, which is important during learning and daily practice. The inverted duct design improves thrust and supports stability in the air. In practice, you get a drone that responds confidently but does not require an aggressive flying style.
Functions for learning and progress
The kit offers three flight modes N / S / M, so you can match the level of assistance to your skills. The altitude hold and stable hover mode make takeoff, orientation, and safe landing easier. Once you master the basics, you move on to full manual control, and the Turtle Mode shortens the time required after the drone flips onto its back.
Up to 10 minutes in the air
The smart battery manages power in an organized way, allowing the flight to last up to 10 minutes. The built-in LED indicators and low power warnings give a clear signal when it's time to end the session. It is a practical solution for people who want more time to practice turns, hovering, and their first acrobatics.
Durable construction and ease
The PA410 frame absorbs part of the impact energy, so the drone handles beginner mistakes better. The VR04 goggles have a design friendly to people who wear glasses, and one-button recording streamlines operation during flight. The entire kit is focused on helping you learn faster, without unnecessary interruptions and without additional assembly.
Content
-
1 x Aquila20 HD Whoop brushless quadcopter
-
1 x LiteRadio 4 SE remote control transmitter
-
1 x VR04 HD FPV goggles
-
2 x Exclusive Aquila20 2S HV 1100mAh battery
-
2 x 18650 2600mAh battery*
-
1 x 2S HV battery charger and voltage meter with BT3.0 plug
-
1 x Gemfan 2218 3-blade propellers (4 pieces)
-
1 x USB-C cable
-
1 x Propeller removal tool
-
1 x Phillips screwdriver
-
1 x 4Pin adapter cable
-
1 x USB Type-C adapter board
-
1 x Portable storage bag
-
1 x User manual
- Product Number
- RD0014-1
Specifications
- Package with Controller
- Yes
- First Person View Glasses Set
- Yes
- Camera
- Yes
- Mobile / Tablet Connection
- Yes
Features & Functions
- Functions
- Altitude Hold
- Operating Range
- 400 m
Camera
- Frame Rate
- 1440p 60fps
- Video Resolution
- Full HD (1080p)
- Photo Resolution
- -
Electric power feed
- Battery
- 1100 mAh
- Maximum Flight Time
- 10 min
- Maximum Charging Time
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.