Drapa acrylic cement paint is intended for exterior concrete, plaster, masonry and cement board surfaces. It is resistant to alkalis, UV radiation, moisture and weather conditions, and offers high coverage and adhesion. Its formula contains no ammonia, heavy metals, free formaldehyde or aromatic hydrocarbons, and has a low odor.
Apply with a brush, roller or spray gun and thin with 5–10% clean water. Coverage is 10–12 m²/lt per coat. It is touch-dry in 30–60 minutes and can be recoated after 3 hours. Prime new, unpainted or deteriorated surfaces with Isacryl or Isacryl Water-Based Primer first. On surfaces in good condition, apply two coats directly. Clean tools immediately after use with water and a mild detergent.
- Type: Acrylic exterior cement paint
- Color: Gray
- Volume: 10 lt
- Suitable surfaces: Concrete, plaster, masonry, cement board and other structural surfaces
- Resistance: Alkalis, UV radiation, moisture and weather conditions
- Coverage: High
- Adhesion: High
- Odor: Low
- Composition: Free from ammonia, heavy metals, free formaldehyde and aromatic hydrocarbons
- Application: With a brush, roller or spray gun
- Thinning: 5–10% with clean water
- Coverage rate: 10–12 m²/lt per coat
- Touch-dry time: 30–60 minutes
- Recoating: After 3 hours
- Surface preparation: Clean and dry, free of dust, oil and loose material
- Primer: Isacryl or Isacryl Water-Based Primer for new, unpainted or deteriorated surfaces
- Tool cleaning: With water and a mild detergent immediately after use
Specifications
- Type
- Concrete Paint
- Colour
- Grey
- Acrilyc
- Yes
Quantity
- Volume
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.