Skroutz.mt

Premier Vintage Motorcycle Helmet Jet ECE 22.06
Motorcycle Helmets

Premier Vintage Motorcycle Helmet Jet ECE 22.06 Code: APJETVI6FIBB120XXL

PREMIER HELMETS VINTAGE SG 8BM GLOSS WHITE/BLACK - Jet Helmet

The Premier Jet helmet is made of Dyneema, Carbon, and Aramid Fiber with an epoxy resin coating.

  • Interior: Removable and washable
  • ...

PREMIER HELMETS VINTAGE SG 8BM GLOSS WHITE/BLACK - Jet Helmet

The Premier Jet helmet is made of Dyneema, Carbon, and Aramid Fiber with an epoxy resin coating.

  • Interior: Removable and washable
  • Internal visor
  • Micrometric Buckle
  • Weight: 1,040 50 gr
  • Certification: Ece 22.06
See full description See full description

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Carbon / Aramid Fiber

    These are advanced composite materials commonly found in top-quality, high-performance helmets.

    The combination of carbon fibers (Carbon) and Aramid fibers offers exceptional strength, low weight, and enhanced energy absorption capability, making them ideal for racing or intensive use.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Size

International
Review the product
Product report

Description

Description

PREMIER HELMETS VINTAGE SG 8BM GLOSS WHITE/BLACK - Jet Helmet

The Premier Jet helmet is made of Dyneema, Carbon, and Aramid Fiber with an epoxy resin coating.

  • Interior: Removable and washable
  • Internal visor
  • Micrometric Buckle
  • Weight: 1,040 ± 50 gr
  • Certification: Ece 22.06

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
APJETVI6FIBB120XXL

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
White
Material
Carbon / Aramid Fiber

Material

Carbon / Aramid Fiber

These are advanced composite materials commonly found in top-quality, high-performance helmets.

The combination of carbon fibers (Carbon) and Aramid fibers offers exceptional strength, low weight, and enhanced energy absorption capability, making them ideal for racing or intensive use.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PREMIER HELMETS VINTAGE SG 8BM GLOSS WHITE/BLACK - Jet Helmet

The Premier Jet helmet is made of Dyneema, Carbon, and Aramid Fiber with an epoxy resin coating.

  • Interior: Removable and washable
  • Internal visor
  • Micrometric Buckle
  • Weight: 1,040 ± 50 gr
  • Certification: Ece 22.06

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
APJETVI6FIBB120XXL

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
White
Material
Carbon / Aramid Fiber

Material

Carbon / Aramid Fiber

These are advanced composite materials commonly found in top-quality, high-performance helmets.

The combination of carbon fibers (Carbon) and Aramid fibers offers exceptional strength, low weight, and enhanced energy absorption capability, making them ideal for racing or intensive use.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

245,99 €
14,00 €   shipping cost