Skroutz.mt

Elettro CF 735 Plasma Cutting Inverter 70A
Welding Machines

Elettro CF 735 Plasma Cutting Inverter 70A

Plasma cutter ELETTRO CF 735 LCD INVERTER

  • Input voltage: 3x208-220-230V 50-60Hz, 3x400-440V 50-60Hz
  • Absorbed power: 30% 9 kVA, 60% 7.1 kVA, 100% 5.8 kVA
  • Cutting current: 10 70 A
  • Duty cycle: 10...

Plasma cutter ELETTRO CF 735 LCD INVERTER

  • Input voltage: 3x208-220-230V 50-60Hz, 3x400-440V 50-60Hz
  • Absorbed power: 30% 9 kVA, 60% 7.1 kVA, 100% 5.8 kVA
  • Cutting current: 10 70 A
  • Duty cycle: 10 minutes according to EN 60974-1 (30% 70A, 60% 55A, 100% 45A)
  • Air pressure: 5 bar
  • Air flow: 190 l/min
  • Cutting thickness in steel: 19 - 25 mm
  • Maximum cutting groove:...
See full description See full description

  • Welding Current

    70

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power

    9

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
4216 00 €
Delivery by Mon, 06 Jul
74,00 €   shipping cost
Sent from Greece
From Tools4pro
Greece
1 piece
See Tools on the page of Tools4pro
Review the product
Product report

Description

Description

Plasma cutter ELETTRO CF 735 LCD INVERTER

  • Input voltage: 3x208-220-230V 50-60Hz, 3x400-440V 50-60Hz
  • Absorbed power: 30% 9 kVA, 60% 7.1 kVA, 100% 5.8 kVA
  • Cutting current: 10 ÷ 70 A
  • Duty cycle: 10 minutes according to EN 60974-1 (30% 70A, 60% 55A, 100% 45A)
  • Air pressure: 5 bar
  • Air flow: 190 l/min
  • Cutting thickness in steel: 19 - 25 mm
  • Maximum cutting groove: 35 mm
  • Protection classification: IP 23
  • Manufacturing standards: EN60974-1 / EN60974-7 / EN60974-10
  • Dimensions: 220x440x460 h mm
  • Weight: 22 kg

Additional features include:

  • Pilot Arc for cutting painted or coated metals.
  • Post-gas function.
  • Safety systems on the flame.
  • Built-in air compressor for absolute independence and ease of use.
  • Ultra Cut Capacity technology for improved cutting performance on large thicknesses.
  • Innovative Thin Cut technology for superior quality cuts.

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
70 A

Welding Current (max): 70


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Power
9 kVA

Power: 9


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
22000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Plasma cutter ELETTRO CF 735 LCD INVERTER

  • Input voltage: 3x208-220-230V 50-60Hz, 3x400-440V 50-60Hz
  • Absorbed power: 30% 9 kVA, 60% 7.1 kVA, 100% 5.8 kVA
  • Cutting current: 10 ÷ 70 A
  • Duty cycle: 10 minutes according to EN 60974-1 (30% 70A, 60% 55A, 100% 45A)
  • Air pressure: 5 bar
  • Air flow: 190 l/min
  • Cutting thickness in steel: 19 - 25 mm
  • Maximum cutting groove: 35 mm
  • Protection classification: IP 23
  • Manufacturing standards: EN60974-1 / EN60974-7 / EN60974-10
  • Dimensions: 220x440x460 h mm
  • Weight: 22 kg

Additional features include:

  • Pilot Arc for cutting painted or coated metals.
  • Post-gas function.
  • Safety systems on the flame.
  • Built-in air compressor for absolute independence and ease of use.
  • Ultra Cut Capacity technology for improved cutting performance on large thicknesses.
  • Innovative Thin Cut technology for superior quality cuts.

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
70 A

Welding Current (max): 70


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Power
9 kVA

Power: 9


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
22000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

4.216,00 €
74,00 €   shipping cost