The Anycubic PLA-CF IPHPFFW-101 filament is reinforced with carbon fibers, which reduce the visibility of layer lines and help create a more uniform surface with a matte finish. Its increased stiffness and low shrinkage help maintain the dimensional accuracy of printed parts.

It is suitable for desktop printers and features a built-in chip that allows the Anycubic ACE Pro to identify the material and automatically adjust print settings, when used with compatible devices and an internet connection. The reusable spool features a threaded connection, and a hardened steel nozzle is recommended.

• Material: PLA-CF
• Color: White
• Weight: 1 kg
• Filament packaging: Spool
• Stiffness: 3100 MPa
• Spool heat resistance: Up to 100 °C
• Recommended drying temperature: 55 °C for 6–8 hours
• Recommended nozzle diameter: ≥ 0.4 mm
• Nozzle temperature: 210–250 °C
• Bed temperature: 55–70 °C
• Recommended print speed: 40–250 mm/s
• Maximum flow rate: 20 mm³/s
• Density: 1.22 g/cm³
• Melting point: 165 °C
• Vicat temperature: 69 °C
• Heat deflection temperature: 60 °C
• Tensile strength: 44 ± 3 MPa
• Elongation at break: 10.5 ± 1.5%
• Flexural strength: 74 ± 5 MPa
• Izod impact strength: 25 ± 2 kJ/m²