3D Printer Filament

Anycubic PETG-CF 1.75mm black 1kg 1τμχ (Spool) 3D Printer Filament Code: IPHTFBK-101

The Anycubic IPHTFBK-101 PETG-CF 3D printing filament is reinforced with carbon fibers, which provide increased stiffness and impact resistance compared with standard PETG. Its satin-matte surface...

The Anycubic IPHTFBK-101 PETG-CF 3D printing filament is reinforced with carbon fibers, which provide increased stiffness and impact resistance compared with standard PETG. Its satin-matte surface conceals layer lines, while its low shrinkage helps ensure dimensional stability in prints.

The material is water- and weather-resistant, with heat resistance up...

See full description See full description

Top specs

  • Material PETG-CF
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
22 91 €
Delivery Tue, 01 Dec - Mon, 07 Dec
14,00 €   shipping cost
Sent from Greece
From GrShop 4.7 (41)
Greece
20+ pieces
See Printer Supplies on the page of GrShop

Learn more about invoicing

Description

Description

The Anycubic IPHTFBK-101 PETG-CF 3D printing filament is reinforced with carbon fibers, which provide increased stiffness and impact resistance compared with standard PETG. Its satin-matte surface conceals layer lines, while its low shrinkage helps ensure dimensional stability in prints.

The material is water- and weather-resistant, with heat resistance up to 100 °C. It is compatible with desktop printers and most spoolless filaments. The built-in chip enables automatic recognition by the Anycubic ACE Pro system, while the reusable threaded spool helps prevent tangling. A hardened steel nozzle is recommended.

  • Material: PETG-CF with carbon fibers
  • Color: Black
  • Weight: 1 kg
  • Compatibility: Anycubic ACE Pro, most spoolless filaments
  • Recommended nozzle diameter: ≥ 0.4 mm
  • Nozzle temperature: 240–270 °C
  • Bed temperature: 65–75 °C
  • Recommended printing speed: 40–250 mm/s
  • Cooling time: 6 s
  • Maximum flow rate: 11 mm³/s
  • Density: 1.32 g/cm³
  • Material flow rate: 14.1 ± 1.6 g/10 min (190 °C / 2.16 kg)
  • Melting temperature: 221 °C
  • Vicat softening temperature: 74 °C
  • Heat deflection temperature: 67 °C (0.45 MPa)
  • Water absorption: 0.38%
  • Material stiffness (Young's modulus): 2550 ± 100 MPa
  • Tensile strength: 54 ± 2 MPa
  • Elongation at break: 12 ± 1%
  • Impact strength (Izod): 3100 ± 150 MPa
  • Flexural strength: 88 ± 2 MPa
  • Izod impact strength (X-Y): 60 ± 4 kJ/m²
  • Tensile strength (Z): 37 ± 3 MPa

Manufacturer

See full description

Specifications

Specifications

Product Number
IPHTFBK-101
Material
PETG-CF
Colour
Black
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Anycubic IPHTFBK-101 PETG-CF 3D printing filament is reinforced with carbon fibers, which provide increased stiffness and impact resistance compared with standard PETG. Its satin-matte surface conceals layer lines, while its low shrinkage helps ensure dimensional stability in prints.

The material is water- and weather-resistant, with heat resistance up to 100 °C. It is compatible with desktop printers and most spoolless filaments. The built-in chip enables automatic recognition by the Anycubic ACE Pro system, while the reusable threaded spool helps prevent tangling. A hardened steel nozzle is recommended.

  • Material: PETG-CF with carbon fibers
  • Color: Black
  • Weight: 1 kg
  • Compatibility: Anycubic ACE Pro, most spoolless filaments
  • Recommended nozzle diameter: ≥ 0.4 mm
  • Nozzle temperature: 240–270 °C
  • Bed temperature: 65–75 °C
  • Recommended printing speed: 40–250 mm/s
  • Cooling time: 6 s
  • Maximum flow rate: 11 mm³/s
  • Density: 1.32 g/cm³
  • Material flow rate: 14.1 ± 1.6 g/10 min (190 °C / 2.16 kg)
  • Melting temperature: 221 °C
  • Vicat softening temperature: 74 °C
  • Heat deflection temperature: 67 °C (0.45 MPa)
  • Water absorption: 0.38%
  • Material stiffness (Young's modulus): 2550 ± 100 MPa
  • Tensile strength: 54 ± 2 MPa
  • Elongation at break: 12 ± 1%
  • Impact strength (Izod): 3100 ± 150 MPa
  • Flexural strength: 88 ± 2 MPa
  • Izod impact strength (X-Y): 60 ± 4 kJ/m²
  • Tensile strength (Z): 37 ± 3 MPa

Manufacturer

Product Number
IPHTFBK-101
Material
PETG-CF
Colour
Black
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

22,91 €
14,00 €   shipping cost