Skroutz.mt

Fox V1 Diffuse Special Edition Motorcycle Helmet Motocross ECE 22.06
Motorcycle Helmets

Fox V1 Diffuse Special Edition Motorcycle Helmet Motocross ECE 22.06 Code: 38636-001

The V1 Diffuse Special Edition helmet offers advanced features that enhance the rider's safety, fit, and comfort. It meets the new ECE 22.06 and DOT certifications, raising standards in every aspect.

...

The V1 Diffuse Special Edition helmet offers advanced features that enhance the rider's safety, fit, and comfort. It meets the new ECE 22.06 and DOT certifications, raising standards in every aspect.

  • Mips additional protection system: Reduces rotational movement by absorbing and redirecting forces.
  • Adjustable visor: With removable side screws.
  • Lightweight...
See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Polycarbonate

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Size

International
240 00 €
Delivery by Wed, 08 Jul
17,00 €   shipping cost
Sent from Greece
From KRD Stores
Greece
See Rider Equipment on the page of KRD Stores
Review the product
Product report

Description

Description

The V1 Diffuse Special Edition helmet offers advanced features that enhance the rider's safety, fit, and comfort. It meets the new ECE 22.06 and DOT certifications, raising standards in every aspect.

  • Mips® additional protection system: Reduces rotational movement by absorbing and redirecting forces.
  • Adjustable visor: With removable side screws.
  • Lightweight construction: Made of polycarbonate and ABS with injection molding for energy dispersal in the event of a collision.
  • Multiple sizes: 4 main shell sizes and 5 EPS sizes for a precise fit.
  • Removable liner: Comfortable and washable, with cheek pads.
  • Ventilation cover: Removable at the mouth with EVA lining on the chin.
  • Ventilation system: 7 intake vents and 4 exhaust vents for optimal airflow.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
38636-001

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Colour
Black
Material
Polycarbonate

Material

Polycarbonate
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The V1 Diffuse Special Edition helmet offers advanced features that enhance the rider's safety, fit, and comfort. It meets the new ECE 22.06 and DOT certifications, raising standards in every aspect.

  • Mips® additional protection system: Reduces rotational movement by absorbing and redirecting forces.
  • Adjustable visor: With removable side screws.
  • Lightweight construction: Made of polycarbonate and ABS with injection molding for energy dispersal in the event of a collision.
  • Multiple sizes: 4 main shell sizes and 5 EPS sizes for a precise fit.
  • Removable liner: Comfortable and washable, with cheek pads.
  • Ventilation cover: Removable at the mouth with EVA lining on the chin.
  • Ventilation system: 7 intake vents and 4 exhaust vents for optimal airflow.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
38636-001

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Colour
Black
Material
Polycarbonate

Material

Polycarbonate
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

240,00 €
17,00 €   shipping cost