Skroutz.mt

Sincosald Novamix 251 Cut Plasma Cutting Inverter 40A
Welding Machines

Sincosald Novamix 251 Cut Plasma Cutting Inverter 40A

Key features:

  • 4.3" color digital LCD display
  • Dual operating voltage 110/230V
  • Multi-function machine MIG/TIG/MMA/CUT

The Double Pulsed MIG system ensures maximum welding quality.

See full description

  • Welding Current

    40

    Suitable for use on thin sheets and DIY constructions.

  • Power Supply Voltage

    433

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    5.1

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
3906 00 €
Delivery by Wed, 22 Jul
14,00 €   shipping cost
Sent from Greece
From Oxytools
Greece
20+ pieces
See Tools on the page of Oxytools
Review the product
Product report

Description

Description

At a glance

  • Universal flexibility: Combination of MIG, TIG AC/DC processes with high frequency HF, MMA, and plasma cutting in one device.
  • Smart interface: 4.3-inch color LCD screen for immediate, easy, and highly intuitive visualization of parameters.
  • Voltage adjustment: Multivoltage function with the ability to connect to both 110 V and 230 V networks for use everywhere.
  • Arc stability: Waveform control for maximum arc stability, even at very low current intensities.

Flexibility 5 in 1

The Novamix 251 Cut welder allows you to easily switch between Manual MIG, MIG SYN, pulse, double pulse, MMA, as well as TIG DC or AC/DC with HF start. In addition, it incorporates the PLASMA CUTTING function, making the tool the most complete and versatile solution for your workshop.

Smart technology and settings

Adapt your tasks with precision thanks to the innovative management software. Through the impressive 4.3-inch LCD screen, you can adjust the electronic inductance, the slope up/down, the postflow, as well as the burn back. The ability to use shielding gas or alternatively cored wire without gas gives you the freedom to work under any conditions.

Specifications

  • Device Type: MIG Inverter DP - AC/DC - MMA - CUT (Plasma)
  • Technology: Inverter Technology
  • Display: Digital LCD 4.3 inches
  • Operating Voltage (Dual Voltage): 110 V / 230 V (Multivoltage)
  • MIG Functions: Manual MIG / MAG / SYN / Pulse / Double Pulse (DP)
  • TIG Functions: TIG AC / DC and DC HF (High Frequency), Lift Arc
  • MMA Function: Suitable for coated electrodes with Hot Start and Arc Force settings
  • Cutting Function: PLASMA CUTTING
  • Wire Spool Capacity: 5 kg
  • Parameter Settings: Electronic inductance, Burn Back, Slope Up, Slope Down, Postflow
  • Polarity: Electronic reverse polarity for use with gasless wire (cored wire)
  • Torch Compatibility: Supports Spool Gun torch and UP / DOWN torch
  • Protection: Built-in temperature sensors for Inverter protection

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, MMA, Plasma Cutting, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
40 A

Welding Current (max): 40


Suitable for use on thin sheets and DIY constructions.
Supply Voltage
433 V

Supply Voltage: 433


It is the supply voltage that the machine requires from the electrical grid.
Power
5.1 kVA

Power: 5.1


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • Universal flexibility: Combination of MIG, TIG AC/DC processes with high frequency HF, MMA, and plasma cutting in one device.
  • Smart interface: 4.3-inch color LCD screen for immediate, easy, and highly intuitive visualization of parameters.
  • Voltage adjustment: Multivoltage function with the ability to connect to both 110 V and 230 V networks for use everywhere.
  • Arc stability: Waveform control for maximum arc stability, even at very low current intensities.

Flexibility 5 in 1

The Novamix 251 Cut welder allows you to easily switch between Manual MIG, MIG SYN, pulse, double pulse, MMA, as well as TIG DC or AC/DC with HF start. In addition, it incorporates the PLASMA CUTTING function, making the tool the most complete and versatile solution for your workshop.

Smart technology and settings

Adapt your tasks with precision thanks to the innovative management software. Through the impressive 4.3-inch LCD screen, you can adjust the electronic inductance, the slope up/down, the postflow, as well as the burn back. The ability to use shielding gas or alternatively cored wire without gas gives you the freedom to work under any conditions.

Specifications

  • Device Type: MIG Inverter DP - AC/DC - MMA - CUT (Plasma)
  • Technology: Inverter Technology
  • Display: Digital LCD 4.3 inches
  • Operating Voltage (Dual Voltage): 110 V / 230 V (Multivoltage)
  • MIG Functions: Manual MIG / MAG / SYN / Pulse / Double Pulse (DP)
  • TIG Functions: TIG AC / DC and DC HF (High Frequency), Lift Arc
  • MMA Function: Suitable for coated electrodes with Hot Start and Arc Force settings
  • Cutting Function: PLASMA CUTTING
  • Wire Spool Capacity: 5 kg
  • Parameter Settings: Electronic inductance, Burn Back, Slope Up, Slope Down, Postflow
  • Polarity: Electronic reverse polarity for use with gasless wire (cored wire)
  • Torch Compatibility: Supports Spool Gun torch and UP / DOWN torch
  • Protection: Built-in temperature sensors for Inverter protection

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, MMA, Plasma Cutting, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
40 A

Welding Current (max): 40


Suitable for use on thin sheets and DIY constructions.
Supply Voltage
433 V

Supply Voltage: 433


It is the supply voltage that the machine requires from the electrical grid.
Power
5.1 kVA

Power: 5.1


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

3.906,00 €
14,00 €   shipping cost