The Sinotimer AFDD2-63 circuit breaker combines arc-fault detection, residual-current protection and thermal-magnetic protection for single-phase 230 V AC installations. It automatically interrupts the power supply in the event of a dangerous electrical arc, current leakage, short circuit or overload. It has a C trip curve and a short-circuit breaking capacity of 4.5 kA.
LED indicators show normal operation, arc-fault detection and residual-current tripping. The TEST button checks the operation of the protection functions, while RESET restores the device after tripping. The device is mounted on a 35 mm DIN rail.
- Rated voltage: 230 V AC
- Rated current: 16 A
- Trip curve: C
- Breaking capacity: 4.5 kA
- Poles: 1P+N
- Rated residual current: 30 mA
- Residual-current protection type: AC
- Frequency: 50 Hz
- Arc-fault detection trip time: 0.1 s
- Indicators: RUN, AF and GF LEDs
- Buttons: TEST and RESET
- Contact status window: Green for normal operation; red for an open contact or fault detection
- Mounting: 35 mm DIN rail
- Housing material: Flame-retardant and resistant to high temperatures
- Dimensions: 96 × 53 × 73 mm
- Mechanical endurance: 80,000 cycles
- Electrical endurance: 20,000 cycles
- Operating temperature: -40 °C to +85 °C
- Standards: IEC 61009-1, IEC 62606, GB/T31143
Specifications
- Panel Switches Type
- Button
- Nominal Voltage
- 230 V
- Rated Voltage
- 16 A
Features & Functions
- WiFi
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.