Skroutz.mt

Irrigation Programmer Battery 2 Outputs
Irrigation Programmers

Irrigation Programmer Battery 2 Outputs

The ED696 irrigation controller independently controls two zones, with separate settings for each outlet. The schedule allows watering durations from 1 minute to 3 hours and 59 minutes, and watering...

The ED696 irrigation controller independently controls two zones, with separate settings for each outlet. The schedule allows watering durations from 1 minute to 3 hours and 59 minutes, and watering intervals of 1 to 12 hours or 1 to 7 days. The rain delay function postpones watering for 24, 48 or 72 hours, while manual start does not change the saved...

See full description See full description

Top specs

  • Protection Certification

    IP65

    The IP65 rating indicates full protection against dust and no water ingress when water is projected with high force (e.g., pressure hose).

  • Time Delay

    The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The ED696 irrigation controller independently controls two zones, with separate settings for each outlet. The schedule allows watering durations from 1 minute to 3 hours and 59 minutes, and watering intervals of 1 to 12 hours or 1 to 7 days. The rain delay function postpones watering for 24, 48 or 72 hours, while manual start does not change the saved settings.

The LCD displays the time in 12- or 24-hour format, and settings are adjusted using a selector and buttons. It has a built-in filter and operates at water pressures from 0.5 to 8 bar.

  • Operation: Battery-powered
  • Outlets: 2
  • Operating pressure: 0.5–8 bar
  • Maximum flow rate: 35 l/min
  • Connection thread: 3/4" and 1" BSP
  • Watering duration: From 1 minute to 3 hours and 59 minutes
  • Watering frequency: From 1 to 12 hours or 1 to 7 days
  • Watering delay: 24, 48 or 72 hours
  • Manual watering: Yes
  • Display: LCD
  • Time format: 12 or 24 hours
  • Filter: Built-in
  • Protection rating: IP65
  • Package contents: 2-zone irrigation controller, sealing tape, 2 replacement seals and connection nuts

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Features & Settings

Mode
Battery

Mode

Battery

"It is ideal for situations where there is no access to a power outlet." 2. "They also have a 9v transformer and can be connected to electrodes that have a voltage of 9v."
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

Outputs
2

Outputs

"As many as the programmer's outputs, so many are the independent irrigation lines."
with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.
Connection Thread
3/4", 1"

Connection Thread

The connection thread is the point where the irrigation programmer connects to the faucet or other irrigation components. 

Protection & Performance

Maximum Pressure
8 bar

Maximum Pressure

The Maximum Pressure refers to the maximum allowable water pressure that an irrigation programmer can handle without causing damage or malfunction. 
Protection Certification
IP65

Protection Certification

IP65
The IP65 rating indicates full protection against dust and no water ingress when water is projected with high force (e.g., pressure hose).

Watering Settings

Time Delay
Yes

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
Yes

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The ED696 irrigation controller independently controls two zones, with separate settings for each outlet. The schedule allows watering durations from 1 minute to 3 hours and 59 minutes, and watering intervals of 1 to 12 hours or 1 to 7 days. The rain delay function postpones watering for 24, 48 or 72 hours, while manual start does not change the saved settings.

The LCD displays the time in 12- or 24-hour format, and settings are adjusted using a selector and buttons. It has a built-in filter and operates at water pressures from 0.5 to 8 bar.

  • Operation: Battery-powered
  • Outlets: 2
  • Operating pressure: 0.5–8 bar
  • Maximum flow rate: 35 l/min
  • Connection thread: 3/4" and 1" BSP
  • Watering duration: From 1 minute to 3 hours and 59 minutes
  • Watering frequency: From 1 to 12 hours or 1 to 7 days
  • Watering delay: 24, 48 or 72 hours
  • Manual watering: Yes
  • Display: LCD
  • Time format: 12 or 24 hours
  • Filter: Built-in
  • Protection rating: IP65
  • Package contents: 2-zone irrigation controller, sealing tape, 2 replacement seals and connection nuts

Manufacturer

Manufacturer Details

Warnings & Safety Information

Features & Settings

Mode
Battery

Mode

Battery

"It is ideal for situations where there is no access to a power outlet." 2. "They also have a 9v transformer and can be connected to electrodes that have a voltage of 9v."
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
No

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

Outputs
2

Outputs

"As many as the programmer's outputs, so many are the independent irrigation lines."
with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.
Connection Thread
3/4", 1"

Connection Thread

The connection thread is the point where the irrigation programmer connects to the faucet or other irrigation components. 

Protection & Performance

Maximum Pressure
8 bar

Maximum Pressure

The Maximum Pressure refers to the maximum allowable water pressure that an irrigation programmer can handle without causing damage or malfunction. 
Protection Certification
IP65

Protection Certification

IP65
The IP65 rating indicates full protection against dust and no water ingress when water is projected with high force (e.g., pressure hose).

Watering Settings

Time Delay
Yes

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
Yes

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
No

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.