Skroutz.mt

Kraft Powderfine Ready Mix Acrylic Putty Filler Spatula 18kg Container
Putty Fillers

Kraft Powderfine Ready Mix Acrylic Putty Filler Spatula 18kg Container Code: JK30111000118

Kraft Powderfine Ready Mix acrylic skim coat is ready to use and has a paste-like consistency. It is used to smooth large interior surfaces on plaster or concrete walls and ceilings, as well as...

Kraft Powderfine Ready Mix acrylic skim coat is ready to use and has a paste-like consistency. It is used to smooth large interior surfaces on plaster or concrete walls and ceilings, as well as masonry and plasterboard, leaving a smooth, even finish.

Apply undiluted with a trowel; it can also be applied with an airless spray gun. It has filling properties...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

Kraft Powderfine Ready Mix acrylic skim coat is ready to use and has a paste-like consistency. It is used to smooth large interior surfaces on plaster or concrete walls and ceilings, as well as masonry and plasterboard, leaving a smooth, even finish.

Apply undiluted with a trowel; it can also be applied with an airless spray gun. It has filling properties and high coverage, is easy to sand and work with, and produces less dust during sanding. It can be recoated with emulsion paints or water-based trim paints and is certified to EN 13963, Type 3A, for plasterboard jointing.

  • Weight: 18 kg
  • Properties: Acrylic
  • Form: Ready-to-use paste
  • Suitable surfaces: Walls, masonry, plasterboard, and plaster or concrete ceilings
  • Application: With a trowel or airless spray gun, undiluted
  • Coats: 2
  • Application thickness: 0.5–2 mm in two coats
  • Sandable: Yes
  • Surface drying time: 2–4 hours at 25°C and 50% relative humidity
  • Recoating time: 4–5 hours
  • Sanding time: 3–4 hours, using No. 200 sandpaper
  • Coverage: 1 kg/m² per coat at a thickness of 0.5 mm
  • Dilution: 0–7%; dilute with 5–7% water for roller application
  • Certification: EN 13963, Type 3A
  • Reaction to fire: A2-s1,d0 according to EN 13963
  • Application temperature: 5–35°C
  • Relative humidity during application: Up to 60%
  • Tool cleaning: Immediately with warm water and soap
  • Storage: In a tightly sealed container, at 5–35°C

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
JK30111000118

Dimensions

Attributes
Acrylic
Type
Paste (Ready-made)

Type

Refers to the physical state of the material. Powder fillers require mixing with water before use (ideal for large surfaces), while forms such as paste, spray, or stick are ready to use (ideal for quick repairs).
Application Surface
Wall / Plaster
Sanding Capability
Yes
No Shrinkage / Crack Resistance
-

Quantity

Weight
18 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

16,40 €
65,00 €   shipping cost