Special Paint & Additives

Kraft Coat Acrylic Red 10lt JK27184021120

Kraft Coat acrylic paint is water-based and designed for sports courts made of concrete or asphalt. Its formula contains quartz aggregates and creates a self-leveling, elastic, non-slip surface with...

Kraft Coat acrylic paint is water-based and designed for sports courts made of concrete or asphalt. Its formula contains quartz aggregates and creates a self-leveling, elastic, non-slip surface with resistance to abrasion, UV radiation and weathering. It is suitable for tennis, basketball and volleyball courts, as well as other sports areas.

For tennis...

See Description & Specifications See Description & Specifications
The product is not available for shipping to the selected country.

Description & Specifications

Kraft Coat acrylic paint is water-based and designed for sports courts made of concrete or asphalt. Its formula contains quartz aggregates and creates a self-leveling, elastic, non-slip surface with resistance to abrasion, UV radiation and weathering. It is suitable for tennis, basketball and volleyball courts, as well as other sports areas.

For tennis courts, it corresponds to ITF Category 3 (medium). Apply 2 coats to new surfaces; a third coat may be applied in demanding conditions. Apply with a roller, paintbrush, brush, squeegee or airless spray gun. Thinning is not recommended.

  • Type: Acrylic sports floor paint
  • Base: Water-based
  • Colour: Red
  • Volume: 10 L
  • Gloss level: Matt
  • Composition: 100% acrylic with quartz aggregates
  • Surface properties: Self-leveling, elastic and non-slip
  • Resistance: Abrasion, UV radiation and weathering
  • Water repellency: Yes
  • Suitable surfaces: Concrete and asphalt, painted or unpainted
  • Uses: Tennis, basketball and volleyball courts; sports floors
  • ITF Category: 3 (medium)
  • Coverage: 4–6 m²/L per coat
  • Coats on new surfaces: 2
  • Coats in demanding conditions: Up to 3
  • Application tools: Roller, paintbrush, brush, squeegee or airless spray gun
  • Thinning: Not recommended (0%)
  • Application temperature: 5°C to 35°C
  • Relative humidity during application: Below 65%
  • Touch dry: 1–2 hours at 23°C
  • Recoating: After at least 6 hours
  • Full cure: 7 days
  • Tool cleaning: Clean immediately after use with warm water and soap or detergent
  • Storage: Store between 5°C and 35°C, away from direct sunlight and rain. Keep the container tightly closed when not in use.

Manufacturer

Specifications

Type
Coat
Colour
Red
Acrilyc
Yes
Luminosity
Matt

Quantity

Volume
10 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.