Maris Polymers Maripool is a one-component protective coating for swimming pools and tanks. This solvent-based colored coating resists water, cleaning chemicals, UV radiation, weathering and abrasion, and does not absorb water after application.
Apply to suitably prepared, clean and dry cement-based substrates, such as concrete and cement mortar. Apply two to three coats using a brush, roller or airless spray gun. The product is ready to use and, if necessary, can be diluted by up to 5–10% with a suitable thinner from the same range. Touch-dry time is approximately 1–2 hours, and recoating is possible after 6–12 hours. Allow the coating to cure for approximately 5–7 days before filling with water.
- Quantity: 1 kg
- Color: Beige
- Form: Liquid coating
- Components: 1
- Application surface: Swimming pool
- Application surface material: Cement-based
- Resistance: Water, cleaning chemicals, UV radiation, weathering and abrasion
- Finish: Satin
- Coverage: Approximately 150 g/m² per coat
- Coats: 2–3
- Application method: Brush, roller or airless spray gun
- Dilution: Up to 5–10% with a suitable thinner from the same range
- Touch-dry time: Approximately 1–2 hours at 23°C
- Recoating time: 6–12 hours
- Full cure: Approximately 5–7 days at 23°C
Product Details
- Type
- Lubricating Liquid
- Colour
- Beige
- Application Surface
- Swimming pool
- Application Surface Material
- Cementitious
Additional Specifications
- Polyurethane
- No
- Elastomer
- No
- Acrylic
- No
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Quantity
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.