Skroutz.mt

Yato YT-81956 Burnishing Polisher 1300W with Speed Setting
Sanders

Yato YT-81956 Burnishing Polisher 1300W with Speed Setting

Key features:

  • Powerful 1300 Watt motor
  • Electronic speed control
  • Smooth Soft Start
  • Constant speed under load
See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Reception Diameter 19 mm
  • Weight (Net) 3800 gr
  • See all
Review the product
Product report

Description

Description

Achieve top-quality finishing on any surface with the YATO YT-81956 satin finishing machine, which features advanced speed stabilization technology.

At a glance

  • Powerful 1300 Watt motor: Provides the necessary power for demanding processing of large surfaces made of metal, wood, or synthetic materials.

  • Electronic speed control: Allows speed adjustment from 1100 to 3500 RPM for perfect adaptation to the specifics of each material.

  • Smooth Soft Start: Prevents sudden kickback during activation, protecting the motor and the work surface from failures.

  • Constant speed under load: The Speed Stabilization system keeps the rotation rate steady even under intense pressure conditions.

Ultimate Control with Soft Start Technology

When you start a demanding task, the last thing you want is a sudden kickback that could ruin your material. Thanks to the advanced Soft Start function, the sander gradually and controllably increases its speed. This way, you protect the motor from power fluctuations and maintain absolute stability and control of the tool from the very first second.

Constant Power with the Speed Stabilization System

Forget the annoying speed fluctuations when you press the tool against metal or wood. The intelligent Speed Stabilization system constantly monitors the surface resistance and provides extra power to the 1300 Watt motor when needed. This way, you achieve a perfectly even and clean satin finish, without unwanted "gouging".

Flexibility with Electronic Speed Control

Every material requires its own special treatment to showcase its quality. With the electronic adjustment scale, you can change the speed from 1100 to 3500 RPM with absolute precision. Whether you are cleaning sensitive surfaces that are at risk of overheating, or removing stubborn rust and old paint, you can adjust the tool's action exactly where you want it.

Ergonomic Design for Hard-to-Reach Areas

Fatigue during work is a thing of the past thanks to the smart, compact design of this satin finishing machine. It allows you to maneuver comfortably even in confined or narrow spaces, such as on boats or metal constructions. The additional handle offers you a stable grip and comfortable use, making the cleaning of large surfaces a simple and pleasant process.

Specifications

  • Manufacturer: YATO

  • Model: YT-81956

  • Nominal Power: 1300 W

  • No-load Speed: 1100 - 3500 RPM

  • Brush/Wheel Diameter: 120 mm

  • Brush/Wheel Width: 100 mm

  • Shaft Diameter: 19 mm

  • Speed Adjustment: Multi-level electronic scale

  • Soft Start Function: Soft Start

  • Speed Stabilization System: Speed Stabilization under load

  • Power Cord Length: 3 m (VDE)

  • Protection Rating: IP20

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
burnishing Polisher

Type

burnishing Polisher

Tribeio for smoothing mainly metallic surfaces with a rotating grinding head.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
1300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Socket Diameter
19 mm
Net Weight
3800 gr
Cable Length
3 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3500 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Achieve top-quality finishing on any surface with the YATO YT-81956 satin finishing machine, which features advanced speed stabilization technology.

At a glance

  • Powerful 1300 Watt motor: Provides the necessary power for demanding processing of large surfaces made of metal, wood, or synthetic materials.

  • Electronic speed control: Allows speed adjustment from 1100 to 3500 RPM for perfect adaptation to the specifics of each material.

  • Smooth Soft Start: Prevents sudden kickback during activation, protecting the motor and the work surface from failures.

  • Constant speed under load: The Speed Stabilization system keeps the rotation rate steady even under intense pressure conditions.

Ultimate Control with Soft Start Technology

When you start a demanding task, the last thing you want is a sudden kickback that could ruin your material. Thanks to the advanced Soft Start function, the sander gradually and controllably increases its speed. This way, you protect the motor from power fluctuations and maintain absolute stability and control of the tool from the very first second.

Constant Power with the Speed Stabilization System

Forget the annoying speed fluctuations when you press the tool against metal or wood. The intelligent Speed Stabilization system constantly monitors the surface resistance and provides extra power to the 1300 Watt motor when needed. This way, you achieve a perfectly even and clean satin finish, without unwanted "gouging".

Flexibility with Electronic Speed Control

Every material requires its own special treatment to showcase its quality. With the electronic adjustment scale, you can change the speed from 1100 to 3500 RPM with absolute precision. Whether you are cleaning sensitive surfaces that are at risk of overheating, or removing stubborn rust and old paint, you can adjust the tool's action exactly where you want it.

Ergonomic Design for Hard-to-Reach Areas

Fatigue during work is a thing of the past thanks to the smart, compact design of this satin finishing machine. It allows you to maneuver comfortably even in confined or narrow spaces, such as on boats or metal constructions. The additional handle offers you a stable grip and comfortable use, making the cleaning of large surfaces a simple and pleasant process.

Specifications

  • Manufacturer: YATO

  • Model: YT-81956

  • Nominal Power: 1300 W

  • No-load Speed: 1100 - 3500 RPM

  • Brush/Wheel Diameter: 120 mm

  • Brush/Wheel Width: 100 mm

  • Shaft Diameter: 19 mm

  • Speed Adjustment: Multi-level electronic scale

  • Soft Start Function: Soft Start

  • Speed Stabilization System: Speed Stabilization under load

  • Power Cord Length: 3 m (VDE)

  • Protection Rating: IP20

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
burnishing Polisher

Type

burnishing Polisher

Tribeio for smoothing mainly metallic surfaces with a rotating grinding head.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
1300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Socket Diameter
19 mm
Net Weight
3800 gr
Cable Length
3 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3500 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

106,78 €
14,00 €   shipping cost