Skroutz.mt

Wi-Tek WI-AP210-Lite v2 Access Point Wi‑Fi 4 Single Band (2.4GHz) Single Kit
Access Points

Wi-Tek WI-AP210-Lite v2 Access Point Wi‑Fi 4 Single Band (2.4GHz) Single Kit

The access point WI-AP210-Lite by Wi-Tek is useful for creating or extending a wireless network to connect multiple devices. It emits a signal at a frequency, the 2.4Ghz, which offers lower speed than those emitting 2 (dual) or 3 (tri band) frequencies. The 2.4Ghz frequency is the most widespread and has a large range. Offers up to 300Mbps in total to... See full description

  • IEEE Networking Standards: 802.11 b/g/n, 802.11a
  • Ethernet Ports: 2
  • Placement: Indoor
49 00 €
Delivery Thu, 09 Jul - Mon, 13 Jul
14,00 €   shipping cost
Sent from Greece
From Magnet Market
Greece
2 pieces
See Networking on the page of Magnet Market
Review the product
Product report

Description

Description

The access point WI-AP210-Lite by Wi-Tek is useful for creating or extending a wireless network to connect multiple devices. It emits a signal at a frequency, the 2.4Ghz, which offers lower speed than those emitting 2 (dual) or 3 (tri band) frequencies. The 2.4Ghz frequency is the most widespread and has a large range. Offers up to 300Mbps in total to devices connected to it. In practice, the actual speed that such a repeater of this generation (Wi-Fi 4) can offer to a device is closer to 50Mbps. It is Wi-Fi 4 generation, an older generation recommended for use with a few devices and for applications that do not require high speeds.

  • IEEE Networking Standards: 802.11 b/g/n, 802.11a
  • Ethernet Ports: 2
  • Placement: Indoor

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (2.4GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (2.4GHz)
An Access Point that only connects to Single Band (2.4GHz) can cover a greater distance compared to that of 5GHz. It may also suffer from congestion and interference from other wireless networks that transmit in the same frequency band. Additionally, the data transmission speed may be lower compared to networks that support Dual Band or Tri Band, due to the limited frequency options it offers.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11 b/g/n, 802.11a
LAN speed
100 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
4 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Specifications

Frequency
Single Band (2.4GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (2.4GHz)
An Access Point that only connects to Single Band (2.4GHz) can cover a greater distance compared to that of 5GHz. It may also suffer from congestion and interference from other wireless networks that transmit in the same frequency band. Additionally, the data transmission speed may be lower compared to networks that support Dual Band or Tri Band, due to the limited frequency options it offers.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11 b/g/n, 802.11a
LAN speed
100 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
4 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Description

The access point WI-AP210-Lite by Wi-Tek is useful for creating or extending a wireless network to connect multiple devices. It emits a signal at a frequency, the 2.4Ghz, which offers lower speed than those emitting 2 (dual) or 3 (tri band) frequencies. The 2.4Ghz frequency is the most widespread and has a large range. Offers up to 300Mbps in total to devices connected to it. In practice, the actual speed that such a repeater of this generation (Wi-Fi 4) can offer to a device is closer to 50Mbps. It is Wi-Fi 4 generation, an older generation recommended for use with a few devices and for applications that do not require high speeds.

  • IEEE Networking Standards: 802.11 b/g/n, 802.11a
  • Ethernet Ports: 2
  • Placement: Indoor

Manufacturer

Manufacturer Details

Warnings & Safety Information
49,00 €
14,00 €   shipping cost