Giolli Giollizinc Forte combines primer, anti-rust protection and topcoat in one product, allowing application to galvanized surfaces and PVC without prior priming. It has a satin finish and can also be applied to wood, iron, copper, light alloys, plastics, concrete, fibre cement and concrete roof tiles. It dries quickly and is resistant to alkalis and acids.
Two coats are required on new surfaces, with a coverage rate of 6–8 m²/L per coat. Recoating can be done wet-on-wet or within 60 minutes at 23°C. Thin by 10–15% with nitro thinner, which is also used to clean tools immediately after use.
- Type: 3-in-1 primer and topcoat
- Surfaces: Galvanized surfaces, PVC, light alloys, iron, copper, wood, concrete, fibre cement, concrete roof tiles and plastics
- Properties: Anti-rust protection, adhesion, resistance to alkalis and acids, fast drying
- Finish: Satin
- Coverage: 6–8 m²/L per coat
- Number of coats: 2 on new surfaces
- Thinning: 10–15% with nitro thinner
- Application methods: Brush, roller, spray gun and airless spray gun
- Recoating: Wet-on-wet or within 60 minutes at 23°C
- Tool cleaning: With nitro thinner immediately after use
- Dry film thickness: 60–80 μm (DFT ≤100 μm)
- Volume: 0.75 L
- Colour: Green RAL 6028
- Product Number
- 0215701.007
Specifications
- Genre
- Primer
- Surface Material
- Wood, Metal
- Surfaces
- Internal
- Properties
- Antirust, Adhesion, Solvent-Base
Quantity
- Mass Gaining
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.