Giolli Acquaver Plus Satinato acrylic enamel is water-based, odourless and non-yellowing. It is suitable for interior and exterior use on wood, metal, non-porous plastics, masonry and plasterboard, with appropriate preparation or primer. It is HACCP-certified according to UNI 11021:2002 for surfaces in areas where food is present and IAQ A+ certified for low emissions.
The enamel is washable and withstands frequent cleaning with detergents, with heat resistance up to 80°C. Apply by brush, roller or spray. It is ready to use and, if needed, can be diluted by up to 5–10% with clean water. The theoretical coverage is 10–12 m²/L per coat; two coats are required on new surfaces.
- Type: Water-based acrylic enamel
- Colour: White
- Finish: Satin
- Volume: 750 ml
- Weight: 1.22 kg
- Certifications: HACCP according to UNI 11021:2002 and IAQ A+
- Emissions: Low emissions, low VOC and APEO-free
- Properties: Odourless, non-yellowing, washable
- Suitable surfaces: Wood, metal, non-porous plastics, masonry and plasterboard
- Use: Interior and exterior
- Temperature resistance: Up to 80°C
- Coverage: 10–12 m²/L per coat
- Coats: 2 on new surfaces
- Application: Brush, roller or spray
- Dilution: Ready to use or dilute by up to 5–10% with clean water
- Touch-dry: 4–5 hours at 23°C
- Fully dry: 20–24 hours
- Recoat: After at least 24 hours
- Tool cleaning: Clean with water and mild soap immediately after use
- Country of origin: Italy
Specifications
- Type
- Enamel
- Colour
- White
- Acrilyc
- Yes
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
- Weight
- 1.22 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.