Skroutz.mt

Esab Cutmaster 50+ Plasma Cutting 50A
Welding Machines

Esab Cutmaster 50+ Plasma Cutting 50A

Key features:

  • Color TFT LCD screen 10.9cm
  • Recommended cutting up to 25mm
  • 3-phase operation 400V
  • CNC ready 14-pin CPC

Cut and penetrate even the toughest metals with absolute precision, using the top portable power of the ESAB Cutmaster 50+.

See full description

  • Welding Current

    50

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    400

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
3440 80 €
Delivery by Fri, 26 Jun
56,00 €   shipping cost
Sent from Greece
From Weldingshop
Greece
See Tools on the page of Weldingshop
Review the product
Product report

Description

Description

At a glance

  • Color display: TFT LCD 10.9 cm for immediate and easy parameter optimization.
  • High performance: Recommended cutting up to 25 mm and edge start reaching 32 mm.
  • CNC Functionality: Pre-installed 14 pin CPC connector for easy automation.
  • Extended lifespan: Post-cut air purge function that protects and cools the consumables.

Smart Color Display & Ultimate Control

You will adjust your cutting parameters instantly, thanks to the easy-to-read 10.9 cm color TFT LCD screen. The large rotary switch is specially designed for use with thick work gloves, allowing you to make immediate adjustments in the field. In addition, the SL60 1Torch torch offers you flexibility with 2T/4T functions and smart air-saving with double-click operation.

Industrial Power & CNC Ready

You will successfully tackle every demanding industrial application, as the Cutmaster 50+ operates with three-phase 400V power and consistently delivers 50 A. It features top piercing capability up to 16 mm and supports grid cutting. For modern automation needs, it comes with a built-in 14-pin CPC connector, giving you the ability for direct arc voltage reading and OK to Move function.

Robust Portability & Protection

You will never have trouble transporting your tool, despite its industrial power. The Cutmaster 50+ weighs 16.5 kg and features an ergonomic casing with 3 practical handles. With IP23S protection certification and full compatibility with generators of 12+ kW power, it is ready to operate under any conditions, while the 3-year ESAB warranty gives you complete peace of mind.

Specifications

  • Manufacturer: ESAB
  • Model: Cutmaster 50+
  • Output Current Range: 10 – 50 A (continuously adjustable)
  • Input Voltage: 400 V, 3 phases, 50/60 Hz
  • Duty Cycle Performance: 50 A @ 60% / 40 A @ 100%
  • Piercing Capacity: Up to 16 mm
  • Recommended Cutting: Up to 25 mm
  • Maximum Edge Cutting (Severance): Up to 32 mm
  • Display: 10.9 cm color TFT LCD
  • Torch Type: SL60 75° 1Torch (5 m cable)
  • CNC Interface: Built-in 14 pin CPC socket & voltage divider
  • Gas Requirements: Compressed air (ISO 8573-1 Class 1.2.2) or Nitrogen 99.95%
  • Air Pressure / Flow: 6.2 – 8.6 bar / 142 – 235 l/min
  • Recommended Generator Power: 12+ kW
  • Protection Category / Certifications: IP23S / CE, UKCA
  • Operating Temperature: -10 to +50 °C
  • Dimensions / Weight: 465 x 200 x 315 mm / 16.5 kg

Package Contents

  • 1 x ESAB Cutmaster 50+ Power Unit
  • 1 x SL60 75° Torch with 5 meter cable
  • 1 x 3 meter grounding cable with 10 mm² clamp and OKC/Dinse connector
  • 1 x General purpose consumables set for cutting and gouging
  • 1 x 1/4” air adapter
  • 1 x User manual and safety instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
50 A

Welding Current (max): 50


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Weight
16500 gr

Additional Features

Inverter
No
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • Color display: TFT LCD 10.9 cm for immediate and easy parameter optimization.
  • High performance: Recommended cutting up to 25 mm and edge start reaching 32 mm.
  • CNC Functionality: Pre-installed 14 pin CPC connector for easy automation.
  • Extended lifespan: Post-cut air purge function that protects and cools the consumables.

Smart Color Display & Ultimate Control

You will adjust your cutting parameters instantly, thanks to the easy-to-read 10.9 cm color TFT LCD screen. The large rotary switch is specially designed for use with thick work gloves, allowing you to make immediate adjustments in the field. In addition, the SL60 1Torch torch offers you flexibility with 2T/4T functions and smart air-saving with double-click operation.

Industrial Power & CNC Ready

You will successfully tackle every demanding industrial application, as the Cutmaster 50+ operates with three-phase 400V power and consistently delivers 50 A. It features top piercing capability up to 16 mm and supports grid cutting. For modern automation needs, it comes with a built-in 14-pin CPC connector, giving you the ability for direct arc voltage reading and OK to Move function.

Robust Portability & Protection

You will never have trouble transporting your tool, despite its industrial power. The Cutmaster 50+ weighs 16.5 kg and features an ergonomic casing with 3 practical handles. With IP23S protection certification and full compatibility with generators of 12+ kW power, it is ready to operate under any conditions, while the 3-year ESAB warranty gives you complete peace of mind.

Specifications

  • Manufacturer: ESAB
  • Model: Cutmaster 50+
  • Output Current Range: 10 – 50 A (continuously adjustable)
  • Input Voltage: 400 V, 3 phases, 50/60 Hz
  • Duty Cycle Performance: 50 A @ 60% / 40 A @ 100%
  • Piercing Capacity: Up to 16 mm
  • Recommended Cutting: Up to 25 mm
  • Maximum Edge Cutting (Severance): Up to 32 mm
  • Display: 10.9 cm color TFT LCD
  • Torch Type: SL60 75° 1Torch (5 m cable)
  • CNC Interface: Built-in 14 pin CPC socket & voltage divider
  • Gas Requirements: Compressed air (ISO 8573-1 Class 1.2.2) or Nitrogen 99.95%
  • Air Pressure / Flow: 6.2 – 8.6 bar / 142 – 235 l/min
  • Recommended Generator Power: 12+ kW
  • Protection Category / Certifications: IP23S / CE, UKCA
  • Operating Temperature: -10 to +50 °C
  • Dimensions / Weight: 465 x 200 x 315 mm / 16.5 kg

Package Contents

  • 1 x ESAB Cutmaster 50+ Power Unit
  • 1 x SL60 75° Torch with 5 meter cable
  • 1 x 3 meter grounding cable with 10 mm² clamp and OKC/Dinse connector
  • 1 x General purpose consumables set for cutting and gouging
  • 1 x 1/4” air adapter
  • 1 x User manual and safety instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
50 A

Welding Current (max): 50


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Weight
16500 gr

Additional Features

Inverter
No
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

3.440,80 €
56,00 €   shipping cost