Skroutz.mt

Esab Cutmaster 70+ Plasma Cutting 70A
Welding Machines

Esab Cutmaster 70+ Plasma Cutting 70A

Key features:

  • Color TFT LCD screen 10.9cm
  • Cutting capacity up to 30mm
  • Three-phase operation 400V
  • CNC ready 14-pin CPC

Achieve top precision and professional power in every demanding plasma cutting project with the ESAB Cutmaster 70+.

See full description

  • Welding Current

    70

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    400

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
4888 40 €
Delivery by Fri, 26 Jun
56,00 €   shipping cost
Sent from Greece
From Weldingshop
Greece
See Tools on the page of Weldingshop
Review the product
Product report

Description

Description

At a glance

  • Color Screen 10.9cm: TFT LCD screen for instant adjustment and optimization of parameters.
  • Cutting up to 30mm: Top piercing capability of 20mm and severance reaching 38mm.
  • CNC Compatibility: Built-in 14-pin CPC socket and voltage divider for automation.
  • SL60 Torch: Ergonomic 1Torch with 2T/4T functions and smart air saving.

Smart Control & Color TFT Display

You will adjust your work parameters with absolute ease, thanks to the clear 10.9 cm color TFT LCD screen. The special rotary switch is designed to operate perfectly even with thick work gloves, allowing you to make immediate and precise adjustments in the field without wasting time.

Industrial Power & CNC Automation

You successfully tackle the toughest industrial challenges, as the Cutmaster 70+ operates with three-phase 400V power and delivers up to 70 A. For modern automation needs, the machine features a pre-installed 14-pin CPC socket and an adjustable voltage divider, making it fully ready for connection to CNC cutting tables.

Torch SL60 & Consumables Protection

Enjoy top ergonomics and efficiency with the SL60 1Torch torch, which supports 2T/4T functions and smart double-press for air saving. The device allows you to easily switch between normal cutting and grid cutting, while the post-cut air purge function significantly extends the lifespan of your consumables.

Specifications

  • Manufacturer: ESAB
  • Model: Cutmaster 70+
  • Output Current Range: 15 – 70 A (continuously adjustable)
  • Input Voltage: 400 V, 3 phases, 50/60 Hz
  • Duty Cycle Performance: 70 A @ 50% / 50 A @ 100%
  • Piercing Capacity: Up to 20 mm
  • Recommended Cutting: Up to 30 mm
  • Maximum Edge Cutting (Severance): Up to 38 mm
  • Display: Color TFT LCD 10.9 cm
  • Torch Type: SL60 75° 1Torch (5 m cable)
  • CNC Interface: Built-in 14 pin CPC socket & voltage divider (20:1, 30:1, 40:1, 50:1, 80:1)
  • Gas Requirements: Compressed air (ISO 8573-1 Class 1.2.2) or Nitrogen 99.95%
  • Air Pressure / Flow: 6.2 – 8.6 bar / 142 – 235 l/min
  • Recommended Generator Power: 20+ kW
  • Recommended Circuit Breaker: 32 A
  • Protection Category / Certifications: IP23S / CE, UKCA
  • Operating Temperature: -10 to +50 °C
  • Dimensions / Weight: 465 x 200 x 315 mm / 17 kg

Package Contents

  • 1 x ESAB Cutmaster 70+ Power Unit
  • 1 x SL60 75° Torch with 5-meter cable
  • 1 x 3-meter grounding cable with 10 mm² clamp and OKC/Dinse 10–25 connector
  • 1 x Consumables set for cutting and gouging
  • 1 x 1/4” air adapter
  • 1 x User manual

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
70 A

Welding Current (max): 70


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
70 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Weight
17000 gr

Additional Features

Inverter
No
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • Color Screen 10.9cm: TFT LCD screen for instant adjustment and optimization of parameters.
  • Cutting up to 30mm: Top piercing capability of 20mm and severance reaching 38mm.
  • CNC Compatibility: Built-in 14-pin CPC socket and voltage divider for automation.
  • SL60 Torch: Ergonomic 1Torch with 2T/4T functions and smart air saving.

Smart Control & Color TFT Display

You will adjust your work parameters with absolute ease, thanks to the clear 10.9 cm color TFT LCD screen. The special rotary switch is designed to operate perfectly even with thick work gloves, allowing you to make immediate and precise adjustments in the field without wasting time.

Industrial Power & CNC Automation

You successfully tackle the toughest industrial challenges, as the Cutmaster 70+ operates with three-phase 400V power and delivers up to 70 A. For modern automation needs, the machine features a pre-installed 14-pin CPC socket and an adjustable voltage divider, making it fully ready for connection to CNC cutting tables.

Torch SL60 & Consumables Protection

Enjoy top ergonomics and efficiency with the SL60 1Torch torch, which supports 2T/4T functions and smart double-press for air saving. The device allows you to easily switch between normal cutting and grid cutting, while the post-cut air purge function significantly extends the lifespan of your consumables.

Specifications

  • Manufacturer: ESAB
  • Model: Cutmaster 70+
  • Output Current Range: 15 – 70 A (continuously adjustable)
  • Input Voltage: 400 V, 3 phases, 50/60 Hz
  • Duty Cycle Performance: 70 A @ 50% / 50 A @ 100%
  • Piercing Capacity: Up to 20 mm
  • Recommended Cutting: Up to 30 mm
  • Maximum Edge Cutting (Severance): Up to 38 mm
  • Display: Color TFT LCD 10.9 cm
  • Torch Type: SL60 75° 1Torch (5 m cable)
  • CNC Interface: Built-in 14 pin CPC socket & voltage divider (20:1, 30:1, 40:1, 50:1, 80:1)
  • Gas Requirements: Compressed air (ISO 8573-1 Class 1.2.2) or Nitrogen 99.95%
  • Air Pressure / Flow: 6.2 – 8.6 bar / 142 – 235 l/min
  • Recommended Generator Power: 20+ kW
  • Recommended Circuit Breaker: 32 A
  • Protection Category / Certifications: IP23S / CE, UKCA
  • Operating Temperature: -10 to +50 °C
  • Dimensions / Weight: 465 x 200 x 315 mm / 17 kg

Package Contents

  • 1 x ESAB Cutmaster 70+ Power Unit
  • 1 x SL60 75° Torch with 5-meter cable
  • 1 x 3-meter grounding cable with 10 mm² clamp and OKC/Dinse 10–25 connector
  • 1 x Consumables set for cutting and gouging
  • 1 x 1/4” air adapter
  • 1 x User manual

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
70 A

Welding Current (max): 70


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
70 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
400 V

Supply Voltage: 400


It is the supply voltage that the machine requires from the electrical grid.
Weight
17000 gr

Additional Features

Inverter
No
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

4.888,40 €
56,00 €   shipping cost