ESAB FILARC 27P low-hydrogen electrodes are designed for downhill welding of circumferential pipe joints. The weld metal has a low hydrogen content, high notch toughness and ductility, reducing the risk of cracking. They are mainly used in pipelines, compressor stations, hot tapping and related projects involving API 5L X52 to X70 steel pipes, as well as in industrial piping systems.
Their productivity is 25–30% higher than that of cellulose-based electrodes and 40–50% higher than that of conventional low-hydrogen electrodes when welding uphill. For welding, a short arc with pulsed or weaving movements and DC- is recommended. The 2.5 mm diameter can also be used for uphill welding to achieve greater heat input.
- Type: Low-hydrogen
- Diameter: 2.5 mm
- Length: 350 mm
- Weight: 1.7 kg
- Quantity: 1
- Application: Downhill welding of circumferential pipe joints
- Alloy type: Carbon-manganese
- Coating: Basic
- SFA/AWS classification: A5.5: E8018-G (closest match)
- EN ISO classification: 2560-A: E 46 4 B 41 H5
- Welding current: DC+(-)
- Current: 80–100 A
- Voltage: 25 V
- Efficiency: 67%
- Melting time per electrode: 53 sec
- Deposition rate: 1.0 kg/h
- Yield strength: 560 MPa
- Tensile strength: 610 MPa
- Elongation: 29%
- Charpy V-notch impact strength at -40 °C: 90 J
- Charpy V-notch impact strength at -50 °C: 70 J
- Weld metal chemical composition: C 0.08%, Mn 1.2%, Si 0.5%
- Approvals: ABS 3Y, BV 3Y H10, CE EN 13479, DB 10.105.03, DNV-GL 3 YH10, LR 4Y40 H10, VdTÜV 02591, Seproz UNA 272581
Specifications
- Type
- Electrodes
- Weight
- 1.7 kg
- Pieces
- 1 pcs
Dimensions
- Diameter
- 2.5 mm
- Length
- 350 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.