ESAB OK Tigrod 13.09 TIG rods are copper-coated and low-alloy, containing 0.5% Mo. They are intended for welding heat-resistant steels, such as those used in boilers, piping and pressure vessels operating at temperatures up to 500 °C. They are used in the power, petrochemical and boiler manufacturing industries.
The weld metal contains 0.5% Mo, 1.1% Mn, 0.7% Si, 0.1% C and 0.2% Cu. Mechanical properties vary depending on the standard and post-weld heat treatment, while Charpy V-notch tests cover temperatures from 20 °C to -60 °C.
- Type: TIG welding rods
- Quantity: 1
- Diameter: 3.2 mm
- Length: 1000 mm
- Alloy: Low-alloy, with 0.5% Mo
- Coating: Copper
- Maximum operating temperature: 500 °C
- Yield strength according to EN (Ar - I1): 490 MPa
- Tensile strength according to EN (Ar - I1): 600 MPa
- Elongation according to EN (Ar - I1): 30%
- Yield strength according to EN after heat treatment: 450 MPa
- Tensile strength according to EN after heat treatment: 550 MPa
- Elongation according to EN after heat treatment: 31%
- Yield strength according to AWS (Ar - I1): 520 MPa
- Tensile strength according to AWS (Ar - I1): 620 MPa
- Elongation according to AWS (Ar - I1): 27%
- Yield strength according to AWS after heat treatment: 510 MPa
- Tensile strength according to AWS after heat treatment: 610 MPa
- Elongation according to AWS after heat treatment: 28%
- Heat treatment: 620 °C for 1 hour
- Impact strength at 20 °C: 180–190 J
- Impact strength at -20 °C: 160–220 J
- Impact strength at -40 °C: 90 J
- Impact strength at -60 °C: 25 J
- EN standard: EN ISO 636-A: W 46 2 2Mo
- AWS standard: AWS A5.28: ER70S-A1 (ER80S-G)
- Approvals: CE, DB, DNV-GL, UKCA, VdTÜV
Specifications
- Type
- Electrodes
- Pieces
- 1 pcs
Dimensions
- Diameter
- 3.2 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.