ESAB OK Tigrod 13.08 rods are designed for welding heat-resistant steels as well as high-tensile-strength steels. They are copper-coated and low-alloy, containing 1.5% Mn and 0.4% Mo, and are used in boilers, pipelines and pressure vessels operating at temperatures up to 500 °C.
The weld metal has the following mechanical properties and chemical composition. Charpy V-Notch impact properties are measured at -30 °C.
- Type: TIG welding rods
- Quantity: 1
- Diameter: 2.4 mm
- Length: 1000 mm
- Alloy: Low-alloy
- Coating: Copper
- Mn content: 1.5%
- Mo content: 0.4%
- Applications: Boilers, pipelines and pressure vessels up to 500 °C
- Weld metal yield strength according to AWS (Ar - I1): 520 MPa
- Weld metal tensile strength according to AWS (Ar - I1): 615 MPa
- Weld metal elongation according to AWS (Ar - I1): 28%
- Weld metal yield strength according to EN (Ar - I1): 620 MPa
- Weld metal tensile strength according to EN (Ar - I1): 690 MPa
- Weld metal elongation according to EN (Ar - I1): 24%
- Charpy V-Notch impact strength according to AWS at -30 °C: 80 J
- Charpy V-Notch impact strength according to EN at -30 °C: 110 J
- Weld metal chemical composition: 1.8% Mn, 0.4% Mo, 0.7% Si and 0.07% C
- EN standard: EN ISO 636-A: W 50 3 Z 2Mo
- AWS standard: AWS A5.28: ER80S-D2
Specifications
- Type
- Electrodes
- Pieces
- 1 pcs
Dimensions
- Diameter
- 2.4 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.