ESAB OK 48.00 electrodes are designed for welding carbon and manganese-carbon steels, as well as fine-grained manganese-carbon steels with high yield strength. The weld deposits are crack-resistant, and the low diffusible hydrogen level of less than 3 ml/100 g reduces the risk of cold cracking. The special coating limits moisture absorption, while the electrodes also weld effectively in the vertical position.
VacPac packaging protects the electrodes from moisture with a sealed multilayer aluminum foil pouch and an inner plastic box. They are ready to use after opening, with no need for rebaking or special storage conditions, and have a safe exposure time of up to 12 hours after opening under normal conditions. The product is H4 R approved and has been tested in accordance with NACE TM0177 and TM0284.
- Type: Welding electrodes
- Welding material: Carbon and manganese-carbon steels, fine-grained manganese-carbon steels with high yield strength
- Diameter: 2.5 mm
- Length: 350 mm
- Classification standard: A5.1 E7018
- Diffusible hydrogen: Less than 3 ml/100 g
- Coating: Low moisture absorption
- Vertical welding: Yes
- Approval: H4 R
- Tests: NACE TM0177 and TM0284
- Packaging: VacPac, sealed multilayer aluminum foil pouch with inner plastic box
- Exposure time after opening: Up to 12 hours under normal conditions
- Weight: 2.8 kg
- Pieces: 1
Specifications
- Type
- Electrodes
- Weight
- 2.8 kg
- Pieces
- 1 pcs
Dimensions
- Diameter
- 2.5 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.